Advertisements
Advertisements
प्रश्न
What is the function of the split rings in a d.c. motor?
Advertisements
उत्तर
The split ring atts as a commutator in a d.c. motor. With the split ring, the direction of current through the coil is reversed after every half rotation of coil and thus the direction of couple rotating the coil remains unchanged and the coil continues to rotate in the same direction.
संबंधित प्रश्न
Which quantity has the unit of watt?
An immersion heater rated 1000 W, 220 V is used to heat 0.01 m3 of water. Assuming that the power is supplied at 220 V and 60% of the power supplied is used to heat the water, how long will it take to increase the temperature of the water from 15°C to 40°C?
Define electric power. An electrical device of resistance R is connected across a source of voltage V and draws a current I. Derive an expression for power in terms of current and resistance.
Give two precautious that you would take while putting off an electric switch.
An immersion rod having resistance of 50 Ω is connected to 220V main supply. Assuming that all the energy generated goes to heat the water, calculate the time taken to heat 5 kg water from 30°C to 100°C.
An electrical appliance is rated 1500 W, 250 V. This appliance is connected to 250 V mains. Calculate:
(i) the current drawn,
(ii) the electrical energy consumed in 60 hours,
(iii) the cost of electrical energy consumed at Rs. 2.50 per kWh.
An electric appliance is rated at 1000 W, 250V. Calculate:
(i) The electrical energy consumed by the appliance in 12 hour.
(ii) The cost of energy consumed at Rs. 1.20 per kWh.
How long would this appliance take to use 1 kWh energy when operated at 250 V?
What is the meaning of electric power of an electrical device? Write its SI unit.
Using a long extension cord in which each conductor has a resistance of 8Ω, a bulb marked as '100 W, 200 V' is connected to a 220 V dc supply of negligible internal resistance as shown in the figure. The power delivered to the bulb is ______ W.
