Advertisements
Advertisements
प्रश्न
An Electric bulb is marked 100 W, 230 V. What how long would this lamp take to consume one unit of electricity?
Advertisements
उत्तर
Energy consumed in kWh = `("W" xx "Time in hour")/1000`
`= (100 xx "t"("in hr"))/1000`
If energy consumed in 1 kWh, then 1 = `(100 xx "t")/1000`
time required for consuming 1 kWh, t = 10 hour.
संबंधित प्रश्न
What is consumed using different electrical appliances, for which electricity bills are paid?
The table below shows the current in three different electrical appliances when connected to the 240 V mains supply:
| Appliance | Current |
| Kettle | 8.5 A |
| Lamp | 0.4 A |
| toaster | 4.8 A |
- Which appliance has the greatest electrical resistance? How does the data show this?
- The lamp is connected to the main supply by using a thin, twin-cored cable consisting of live and natural wires. State two reasons why this cable should not be used for connecting the kettle to the mains supply.
- Calculate the power rating of the kettle when it is operated from the 240 V mains supply.
- A main takes the kettle abroad where the mains supply is 120 V. What is the current is the kettle when it is operated from the 120 V supply?
Two lamps, one rated 220 V, 50 W and the other rated 220 V, 100 W, are connected in serieswith mains of 220 V. Explain why does the 50 W lamp consume more power
A simple electric circuit has a 30 V battery and a resistor ot 60 o. What will be the current in the circuit? The resistance of the oonnecting wires is negligible.
Why is heating coil wound in the form of a helix in electric stove?
Why is the electric power from the generating station transmitted at high voltage?
Three 250 W heaters are connected in parallel to a 100 V supply, Calculate the resistance of each heater.
A family uses 8 kW of power. Direct solar energy is incident on the horizontal surface at an average rate of 200 W per square meter. If 20% of this energy can be converted to useful electrical energy, how large an area is needed to supply 8 kW?
What is the meaning of electric power of an electrical device? Write its SI unit.
A conductor of 10 Ω is connected across a 6 V ideal source. The power supplied by the source to the conductor is ______.
