हिंदी
तमिलनाडु बोर्ड ऑफ सेकेंडरी एज्युकेशनएचएससी विज्ञान कक्षा १२

What is intensity (or) amplitude division? - Physics

Advertisements
Advertisements

प्रश्न

What is intensity (or) amplitude division?

टिप्पणी लिखिए
Advertisements

उत्तर

  1. If we allow light to pass through a partially silvered mirror (beam splitter), both reflection and refraction take place simultaneously.
  2. As the two light beams are obtained from the same light source, the two divided light beams will be coherent beams.
  3. They will be either in-phase or at constant phase differences.
  4. Instruments like Michelson’s interferometer, FabrayPerrot etalon work on this principle.

    Intensity or amplitude division
shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 7: Wave Optics - Evaluation [पृष्ठ १०३]

APPEARS IN

सामाचीर कलवी Physics - Volume 1 and 2 [English] Class 12 TN Board
अध्याय 7 Wave Optics
Evaluation | Q 13. | पृष्ठ १०३

संबंधित प्रश्न

A long narrow horizontal slit is paced 1 mm above a horizontal plane mirror. The interference between the light coming directly from the slit and that after reflection is seen on a screen 1.0 m away from the slit. Find the fringe-width if the light used has a wavelength of 700 nm.


Answer in brief:

In Young's double-slit experiment what will we observe on the screen when white light is incident on the slits but one slit is covered with a red filter and the other with a violet filter? Give reasons for your answer.


What are the two methods for obtaining coherent sources in the laboratory?


The intensity of the light coming from one of the slits in Young's experiment is twice the intensity of the light coming from the other slit. What will be the approximate ratio of the intensities of the bright and dark fringes in the resulting interference pattern?


Explain constructive and destructive interference with the help of a diagram?


What is phase of a wave?


Obtain the equation for bandwidth in Young’s double slit experiment.


Does diffraction take place at Young’s double-slit?


In Young's double-slit experiment, if the width of the 2nd bright fringe is 4 x 10-2 cm, then the width of the 4th bright fringe will be ______ cm.


A metal rod has length, cross-sectional area and Young's modulus as L, A and Y, respectively. If the elongation in the rod produced is l, then work done is proportional to ______.


In a Young's experiment, two coherent sources are placed 0.60 mm apart and the fringes are observed one metre away. If it produces the second dark fringe at a distance of 1 mm from the central fringe, the wavelength of monochromatic light used would be ____________.


In Young's double slit experiment with a source of light of wavelength 5860 Å, the first maxima will occur when ____________.


In a biprism experiment, red light of wavelength 6500 Å was used. It was then replaced by green light of wavelength 5200 Å. The value of n for which (n + 1)th green bright band would coincide with nth red bright band for the same setting is ______.


In the biprism experiment, a source of monochromatic light is used for a certain distance between slit and eyepiece. When the distance between two virtual sources is changed from dA to dB, then the fringe width is changed from ZA to ZB. The ratio ZA to ZB is ______


In Young's double-slit experiment, the distance between the slits is 3 mm and the slits are 2 m away from the screen. Two interference patterns can be obtained on the screen due to light of wavelength 480 nm and 600 run respectively. The separation on the screen between the 5th order bright fringes on the two interference patterns is ______


A beam of electrons is used in Young's double-slit experiment. If the speed of electrons is increased then the fringe width will ______.


How will the interference pattern of Young's double slit change if one of the two slits is covered by a paper which transmits only half of the light intensity?


Show graphically the intensity distribution in a single slit diffraction pattern.


Interference fringes are produced on a screen by using two light sources of intensities I and 9I. The phase difference between the beams is `pi/2` at point P and π at point Q on the screen. The difference between the resultant intensities at point P and Q is ______.


A ray of light AO in a vacuum is incident on a glass slab at an angle of 60° and refracted at an angle of 30° along OB as shown in the figure. The optical path length of the light ray from A to B is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×