Advertisements
Advertisements
प्रश्न
The unit of electrical power is _______.
विकल्प
volt
watt
joule
ampere
Advertisements
उत्तर
The unit of electrical power is watt.
Explanation:
It is defined as 1 joule per second (1 W = 1 J/s). It represents the rate at which electrical energy is consumed or produced.
संबंधित प्रश्न
Redraw the circuit of question 1, putting in an ammeter to measure the current through the resistors and a voltmeter to measure the potential difference across the 12 Ω resistors. What would be the readings in the ammeter and the voltmeter?
What do the following symbols mean in circuit diagrams?
Draw circuit symbols for
an open switch
Draw a circuit diagram to show how 3 bulbs can be lit from a battery so that 2 bulbs are controlled by the same switch the third bulb has its own switch.
Observe the following figure which bulb get fuse?
Two tungsten bulbs of power 50 W and 60 W work on 220 V potential difference. If they are connected in parallel, how much current will flow in the main conductor?
Resistances R1, R2, R3 and R4 are connected as shown in the figure. S1 and S2 are two keys. Discuss the current flowing in the circuit in the following cases.
- Both S1 and S2 are closed.
- Both S1 and S2 are open.
- S1 is closed but S2 is open.
Match the column ‘A’ with column ‘B’.
|
Column ‘A’
|
Column ‘B’ |
|
(1) Eka - boron
|
(a) Germanium
|
|
(2) Eka - Aluminium
|
(b) Scandium
|
|
(3) Eka - Silicon
|
(c) Gallium |
Name the instrument used to control current in an electric circuit.
Explain the following:
Closed circuit
What is open circuit?
Find the odd one out and give its explanation.
Write scientific reason.
It is beneficial to carry electrical energy in AC form as it is carried over long distances.
What is the use of earthing wire?
In the given circuit diagram, which of the given switch(s) should be closed. So that only bulb A glows.
Rahul wants to make an electric circuit. He has a bulb, two wires, a safety pin, and a piece of copper. He does not have any electric cell or battery. Suddenly he gets some idea. He uses lemon instead of a battery and makes a circuit. Will the bulb glow?
In which among the following circuits does the bulb glow?
In the circuit shown, which switches (L,M or N) must be closed to light up the bulb?
Study the three electric circuits below. Each of them has a glass rod (G), a steel rod (S), and a wooden rod (W).
In which of the electric circuits would the bulb not light up.
When a circuit is open, _____ cannot pass through it.
Explain about domestic electric circuits. (circuit diagram not required)
Instead of metal wires, a jute string can be used to make a circuit.
The rate of flow of electric charges in a circuit is called ______.
In an electric circuit, the current starts from ______.
Three bulbs A, B, C are connected in a circuit as shown in the following figure. When the switch is ‘ON’
Observe the circuit given:
1. Would any of the bulbs glow when the switch is in the ‘OFF’ position?
2. What will be the order in which the bulbs A, B, and C will glow when the switch is moved to the ‘ON’ position?
In the above circuit, if the current reading in the ammeter A is 2A, what would be the value of R1?
Match the following
| 1. | Insulator | a. | Coulomb |
| 2. | Conductor | b. | Electric circuit |
| 3. | Closed path | c. | Copper |
| 4. | Electric charge | d. | Rubber |
In the following arrangement shown in the following figure, the bulb will not glow if the ends A and B are connected with
Will the bulb glow in the circuit shown in the following figure? Explain.
Boojho has a cell and a single piece of connecting wire. Without cutting the wire in two, will he be able to make the bulb glow? Explain with the help of a circuit diagram.
Write a short note on the different electrical circuits.
Overloading of electric circuits can lead to short-circuiting.
Name the device which is used to measure the strength of the electric current in an electric circuit.
A complete circuit is left on for several minutes, causing the connecting copper wire to become hot. As the temperature of the wire increases, the electrical resistance of the wire
Assertion: People struck by lightning receive a severe electrical shock.
Reason: Lightning carries very high voltage.
