Advertisements
Advertisements
प्रश्न
The least count of a vernier callipers is 0.01 cm and it has an error of + 0.07 cm. While measuring the radius of a sphere, the main scale reading is 2.90 cm and the 5th vernier scale division coincides with the main scale. Calculate the correct radius.
Advertisements
उत्तर
Least count (L.C.) = 0.01 cm
Error = + 0.07 cm
Correction = (Error) = – (+ 0.07) = – 0.07 cm
Main scale reading = 2.90 cm
Vernier scale division (V.S.D.) coinciding with main scale = 5th Observed diameter of sphere = Main scale reading + L.C. × V.S.D.
= 2.90 + 0.01 × 5
= 2.90 + 0.05
= 2.95 cm
Corrected diameter = Observed diameter + Correction
= 2.95 + (−0.07)
= 2.95 – 0.07
= 2.88 cm
∴ Corrected radius = 2.88/2 = 1.44 cm
APPEARS IN
संबंधित प्रश्न
The pitch of a screw gauge is 0.5 mm and the head scale is divided in 100 parts. What is the least count of a screw gauge?
The pitch of a screw gauge is 1 mm and the circular scale has 100 divisions. In measurement of the diameter of a wire, the main scale reads 2 mm and 45th mark on the circular scale coincides with the base line. Find
(i) The least count and
(ii) The diameter of the wire.
Why is the metre length in terms of the wavelength of light considered more accurate?
The circular scale of a screw gauge has 100 divisions. Its spindle moves forward by 2.5 mm when given five complete turns. Calculate
- pitch
- least count of the screw gauge
A micrometre screw gauge having a positive zero error of 5 divisions is used to measure diameter of a wire, when reading on the main scale is 3rd division and the 48th circular scale division coincides with baseline. If the micrometer has 10 divisions to a centimetre on the main scale and 100 divisions on a circular scale, calculate
- Pitch of screw
- Least count of screw
- Observed diameter
- Corrected diameter.
Name the measuring employed to measure the diameter of a needle.
State whether the following statement is true or false by writing T/F against it.
A metre scale can measure a length of 6.346 cm.
What is the least count in the case of the following instrument?
Screw gauge
Consider the following case where the zero of vernier scale and the zero of the main scale are clearly seen. If L.C. of the vernier calipers is 0.01 cm, write the zero error and zero correction of the following.
