Advertisements
Advertisements
प्रश्न
State the formula for determining least count for a vernier callipers.
Advertisements
उत्तर
Least count (L.C.) = `"Pitch"/"No. of vernier scale division"`
For example: If the pitch is 0.1 cm and there are ten vernier scale divisions.
Then L.C. = `0.1/10` = 0.01 cm
APPEARS IN
संबंधित प्रश्न
The wavelength of light of a particular colour is 5800 Å.
Express it in nanometre.
Explain the terms : Pitch .
How are they determined?
Describe the procedure to measure the diameter of a wire with the help of a screw gauge.
The diameter of a thin wire can be measured by
The thimble of a screw gauge has 50 divisions. The spindle advances 1 mm when the screw is turned through two revolutions.
(i) What is the pitch of the screw gauge?
(ii) What is the least count of the screw gauge?
A screw gauge has 50 divisions on its circular scale and its screw moves by 1 mm on turning it by two revolutions. When the flat end of the screw is in contact with the stud, the zero of the circular scale lies below the base line and 4th division of the circular scale is in line with the base line. Find
(i) The pitch,
(ii) The least count and
(iii) The zero error of the screw gauge
Define the term pitch.
State the correction if the positive error is 7 divisions when the least count is 0.01 cm.
The thimble of a screw gauge has 50 divisions for one rotation. The spindle advances 1 mm when the screw is turned through two rotations.
- What is the pitch of the screw?
- What is the least count of screw gauge?
- When the screw gauge is used to measure the diameter of wire the reading on the sleeve is found to be 0.5 mm and reading on thimble is found, 27 divisions. What is the diameter of the wire in centimetres?
What do you understand by the following term as applied to micrometre screw gauge?
Baseline
