Advertisements
Advertisements
प्रश्न
Who invented vernier callipers?
Advertisements
उत्तर
Vernier callipers were invented by Pierre Vernier.
APPEARS IN
संबंधित प्रश्न
Draw a neat and labelled diagram of a vernier callipers. Name its main parts and state their functions.
State one use of a screw gauge.
In the vernier callipers, there are 10 divisions on the vernier scale and 1 cm on the main scale is divided into 10 parts. While measuring the length, the zero of the vernier lies just ahead of the 1.8 cm mark and the 4th division of vernier coincides with a main scale division.
(a) Find the length.
(b) If zero error of vernier callipers is -0.02 cm,
What is the correct length ?
The main scale of vernier callipers has 10 divisions in a centimetre and 10 vernier scale divisions coincide with 9 main scale divisions. Calculate
- pitch
- L.C. of vernier callipers.
(a) A vernier scale has 20 divisions. It slides over the main scale, whose pitch is 0.5 mm. If the number of divisions on the left hand of the zero of vernier on the main scale is 38 and the 18th vernier scale division coincides with the main scale, calculate the diameter of the sphere, held in the jaws of vernier callipers.
(b) If the vernier has a negative error of 0.04 cm, calculate the corrected radius of the sphere.
A micrometre screw gauge having a positive zero error of 5 divisions is used to measure diameter of a wire, when reading on the main scale is 3rd division and the 48th circular scale division coincides with baseline. If the micrometer has 10 divisions to a centimetre on the main scale and 100 divisions on a circular scale, calculate
- Pitch of screw
- Least count of screw
- Observed diameter
- Corrected diameter.
What do you understand by the following term as applied to screw gauge?
Zero error
A measuring cylinder is filled with water up to a level of 30 ml. A solid body is immersed in it so that the level of water rises to 37 ml. Now the solid body is tied with a cork and then immersed in water so that the water level rises to 40 ml. Find the volume of the solid body and the cork.
Explain the term least count of a screw gauge. How are they determined?
State whether the following statement is true or false by writing T/F against it.
The metre scale, vernier calipers, and screw gauge are in decreasing order of least count.
