हिंदी
तमिलनाडु बोर्ड ऑफ सेकेंडरी एज्युकेशनएसएसएलसी (अंग्रेजी माध्यम) कक्षा १०

Name any two devices, which are working on the heating effect of the electric current.

Advertisements
Advertisements

प्रश्न

Name any two devices, which are working on the heating effect of the electric current.

एक पंक्ति में उत्तर
Advertisements

उत्तर

  1. Electric heater
  2. Fuse wire
shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 4: Electricity - Evaluation [पृष्ठ ५६]

APPEARS IN

सामाचीर कलवी Science [English] Class 10 SSLC TN Board
अध्याय 4 Electricity
Evaluation | Q VI. 4. | पृष्ठ ५६

संबंधित प्रश्न

In the circuit diagram given below five resistances of 10 Ω, 40 Ω, 30 Ω, 20 Ω, and 60 Ω are connected as shown to a 12 V battery. 

  

Calculate:
(a) total resistance in the circuit. 

(b) total current flowing in the circuit.

 


Ten bulbs are connected in a series circuit to a power supply line. Ten identical bulbs are connected in a parallel circuit to an identical power supply line.

  1. Which circuit would have the highest voltage across each bulb?
  2. In which circuit would the bulbs be brighter?
  3. In which circuit, if one bulb blows out, all others will stop glowing?
  4. Which circuit would have less current in it?

Ten bulbs are connected in a series circuit to a power supply line. Ten identical bulbs are connected in a parallel circuit to an identical power supply line. 

(b) In which circuit, if one bulbs be brighter?


State the S.I. unit of current.


Name the physical quantity which is measured by an ammeter.

What do you mean by a solenoid?

Two cells each having an e.m.f. of 2 V and an internal resistance of \(2,\Omega\) are connected in series as shown in Fig. What is the current flowing through the circuit in each case?


Two electric bulbs rated 100 W; 220 V and 60 W; 220 V are connected in parallel to electric mains of 220 V. Find the current drawn by the bulbs from the mains.


The power of an electric device is a product of ______ and ______.


A current of 1 A is drawn by a filament of an electric bulb. Number of electrons passing through a cross section of the filament in 16 seconds would be roughly


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×