Advertisements
Advertisements
प्रश्न
Electrical power P is given by the expression P = (Q × V) ÷ time
(a) What do the symbols Q and V represent?
(b) Express the power P in terms of current and resistance explaining the meanings of symbols used there in.
Advertisements
उत्तर
(a) Q represents Charge and V represents Voltage.
(b) Electrical Power , P = I2R
where I : Current
and R : Resistance
संबंधित प्रश्न
An electric circuit consisting of a 0.5 m long nichrome wire XY, an ammeter, a voltmeter, four cells of 1.5 V each and a plug key was set up.
(i) Draw a diagram of this electric circuit to study the relation between the potential difference maintained between the points 'X' and 'Y' and the electric current flowing through XY.
An electric bulb of resistance 20 Ω and a resistance wire of 4 Ω are connected in series with a 6 V battery.
Draw the circuit diagram, and calculate:
(a) total resistance of the circuit.
(b) current through the circuit.
(c) potential difference across the electric bulb.
(d) potential difference across the resistance wire.
How do you think the brightness of two lamps arranged in parallel compares with the brightness of two lamps arranged in series (both arrangements having one cell)?
If the current passing through a conductor is doubled, what will be the change in heat produced
In the network shown in the following adjacent Figure, calculate the equivalent resistance between the points.
- A and B
- A and C
If a charge of 420 C flows through a conducting wire in 5 minutes what is the value of the current?
Define the following:
Semiconductors
Tick (✓) the correct choice among the following :
There are 500 turns and 2000 turns in the primary and secondary coil of a
transformer respectively. If th e output voltage is 1000 V, how large is the
input voltage?
The flow of electric charge per unit time is called potential difference.
What are the effects of electric current?
