Advertisements
Advertisements
प्रश्न
Define percentage error.
Advertisements
उत्तर
When relative error is represented as percentage it is called the percentage error.
Percentage error = `(triangle"a"_"mean")/("a"_"mean") xx 100`
APPEARS IN
संबंधित प्रश्न
The error in the measurement of the sides of a rectangle is 1%. The error in the measurement of its area is ______.
Define absolute error.
Define relative error.
Answer the following question.
Show that if Z = `"A"/"B"`, `(triangle"Z")/"Z" = (triangle"A")/"A" + (triangle "B")/"B"`
The distance travelled by an object in time (100 ± 1)s is (5.2 ± 0.1) m. What are the speed and its maximum relative error?
In a workshop, a worker measures the length of a steel plate with Vernier calipers having a least count 0.01 cm. Four such measurements of the length yielded the following values: 3.11 cm, 3.13 cm, 3.14 cm, 3.14 cm. Find the mean length, the mean absolute error, and the percentage error in the measured value of the length.
In Ohm’s experiments, the values of the unknown resistances were found to be 6.12 Ω, 6.09 Ω, 6.22 Ω, 6.15 Ω. Calculate the (mean) absolute error, relative error, and percentage error in these measurements.
In an experiment, the percentage of error occurred in the measurement of physical quantities A, B, C and D are 1%, 2%, 3% and 4% respectively. Then the maximum percentage of error in the measurement X, where X = `(A^2B^(1/2))/(C^(1/3)D^3)`, will be:
If Q = `"X"^"n"/"Y"^"m"` and Δx is absolute error in the measurement of X, Δy is absolute error in the measurement of Y, then absolute error ΔQ in Q is ______.
Measure of two quantities along with the precision of respective measuring instrument is A = 2.5 ms–1 ± 0.5 ms–1 B = 0.10 s ± 0.01 s. The value of A B will be ______.
The vernier scale of a travelling microscope has 50 divisions which coincide with 49 main scale divisions. If each main scale division is 0.5 mm, calculate the minimum inaccuracy in the measurement of distance.
Time for 20 oscillations of a pendulum is measured as t1 = 39.6 s; t2 = 39.9 s; t3 = 39.5 s. What is the precision in the measurements? What is the accuracy of the measurement?
A physical quantity X is related to four measurable quantities a, b, c and d as follows: X = a2 b3 c5/2d–2. The percentage error in the measurement of a, b, c and d are 1%, 2%, 3% and 4%, respectively. What is the percentage error in quantity X? If the value of X calculated on the basis of the above relation is 2.763, to what value should you round off the result.
The resistance R = `"V"/"I"`, where V = (50 ± 2) V and I = (20 ± 0.2)A. The percentage error in R is 'x' %.
The value of x to the nearest integer is ______.
A travelling microscope has 20 divisions per cm on the main scale while its Vernier scale has total 50 divisions and 25 Vernier scale divisions are equal to 24 main scale divisions, what is the least count of the travelling microscope?
A travelling microscope is used to determine the refractive index of a glass slab. If 40 divisions are there in 1 cm on main scale and 50 Vernier scale divisions are equal to 49 main scale divisions, then least count of the travelling microscope is ______ × 10-6 m.
The least count of the main scale of a screw gauge is 1 mm. The minimun number of divisions on its circular scale required to measure 5 µm diameter of a wire is ______.
Systematic errors cause all measurements to shift in the same direction. What does this primarily affect?
What are random errors?
Which strategy would best reduce an instrumental error caused by a faulty weighing scale?
If the pointer of the voltmeter is not exactly at the zero of the scale, then the error is called ______.
Zero error of an instrument introduces ______.
Error due to non-removal of parallax between pointer and its image in case of magnetic compass needle causes ______.
The reason behind holding thermometer in the mouth instead of the armpit is to reduce ______.
