Advertisements
Advertisements
प्रश्न
Answer the following question.
Show that if Z = `"A"/"B"`, `(triangle"Z")/"Z" = (triangle"A")/"A" + (triangle "B")/"B"`
Advertisements
उत्तर
Errors in divisions:
Suppose, Z = `"A"/"B"` and measured values of A and B are (A ± ΔA) and (B ± ΔB) then,
Z ± ΔZ = `("A" +- triangle"A")/("B"+-triangle"B")`
∴ Z`(1 +- (triangle"Z")/"Z") = ("A"[1 +-(Δ"A"//"A")])/("B"[1 +-(Δ"B"//"B")])`
`= "A"/"B" xx [1 +-(Δ"A"//"A")]/[1 +-(Δ"B"//"B")]`
As, `(triangle"B")/"B" ≪ 1,` expanding using Binomial theorem,
`"Z"(1 +- (triangle"Z")/"Z") = "Z" (1 +- (triangle"A")/"A") xx (1 bar+ (Δ"B")/"B")` ....`(because "A"/"B" = "Z")`
∴ `1 +- (Δ"Z")/"Z" = 1 +- (Δ"A")/"A" bar+ (Δ"B")/"B" +- (Δ"A")/"A" xx (Δ"B")/"B"`
Ignoring term `(Δ"A")/"A" xx (Δ"B")/"B", (Δ"Z")/"Z" = +- (Δ"A")/"A" bar+ (Δ"B")/"B"`
This gives four possible values of `(Δ"Z")/"Z"` as
`(+ (Δ"A")/"A" - (Δ"B")/"B"), (+(Δ"A")/"A" + (Δ"B")/"B"), (-(Δ"A")/"A" - (Δ"B")/"B") and (-(Δ"A")/"A" + (Δ"B")/"B")`
∴ Maximum relative error of `(Δ"Z")/"Z" +- ((Δ"A")/"A" + (Δ"B")/"B")`
Thus, when two quantities are divided, the maximum relative error in the result is the sum of relative errors in each quantity.
APPEARS IN
संबंधित प्रश्न
Define absolute error.
Define Mean absolute error.
Define relative error.
Define percentage error.
If the measured values of the two quantities are A ± ΔA and B ± ΔB, ΔA and ΔB being the mean absolute errors. What is the maximum possible error in A ± B? Show that if Z = `"A"/"B"`
`(Delta "Z")/"Z" = (Delta "A")/"A" + (Delta "B")/"B"`
The masses of two bodies are measured to be 15.7 ± 0.2 kg and 27.3 ± 0.3 kg. What is the total mass of the two and the error in it?
In a workshop, a worker measures the length of a steel plate with Vernier calipers having a least count 0.01 cm. Four such measurements of the length yielded the following values: 3.11 cm, 3.13 cm, 3.14 cm, 3.14 cm. Find the mean length, the mean absolute error, and the percentage error in the measured value of the length.
Find the percentage error in kinetic energy of a body having mass 60.0 ± 0.3 g moving with a velocity of 25.0 ± 0.1 cm/s.
In Ohm’s experiments, the values of the unknown resistances were found to be 6.12 Ω, 6.09 Ω, 6.22 Ω, 6.15 Ω. Calculate the (mean) absolute error, relative error, and percentage error in these measurements.
The relative density of a metal may be found by hanging a block of the metal from a spring balance and nothing that in air, the balance reads (5 .00 ± 0.05)N while in water, it reads (4.00 ± 0.05)N. The relative density would be quoted as ______.
You measure two quantities as A = 1.0 m ± 0.2 m, B = 2.0 m ± 0.2 m. We should report correct value for `sqrt(AB)` as ______.
Time for 20 oscillations of a pendulum is measured as t1 = 39.6 s; t2 = 39.9 s; t3 = 39.5 s. What is the precision in the measurements? What is the accuracy of the measurement?
In a Screw Gauge, the fifth division of the circular scale coincides with the reference line when the ratchet is closed. There are 50 divisions on the circular scale, and the main scale moves by 0.5 mm on a complete rotation. For a particular observation, the reading on the main scale is 5 mm and the 20th division of the circular scale coincides with the reference line. Calculate the true reading.
If E, L, M, and G denote the quantities as energy, angular momentum, mass, and constant of gravitation respectively, then the dimensions of P in the formula P = EL2M−5G−2 are ______.
The dependence of g on geographical latitude at sea level is given by `g = g_0(1 + betasin^2Phi)` where Φ is the latitude angle and β is a dimensionless constant. If Δg is the error in the measurement of g then the error in measurement of latitude angle is ______.
A travelling microscope is used to determine the refractive index of a glass slab. If 40 divisions are there in 1 cm on main scale and 50 Vernier scale divisions are equal to 49 main scale divisions, then least count of the travelling microscope is ______ × 10-6 m.
The least count of the main scale of a screw gauge is 1 mm. The minimun number of divisions on its circular scale required to measure 5 µm diameter of a wire is ______.
If the zero of the vernier lies on the right-hand side and the fourth division coincides with the main scale division when the jaws are in contact so the correction will be ______.
A laboratory balance shows a mass reading even when no object is placed on the pan. What is the main cause of this error?
What are random errors?
A weighing scale that always reads a constant +0.2 kg because its zero mark is misaligned is a clear example of a(n):
If the pointer of the voltmeter is not exactly at the zero of the scale, then the error is called ______.
