Advertisements
Advertisements
प्रश्न
An electric iron of resistance 20 Ω draws a current of 5 A. The heat developed in the iron in 30 seconds is ______.
विकल्प
15000 J
6000 J
1500 J
3000 J
Advertisements
उत्तर
An electric iron of resistance 20 Ω draws a current of 5 A. The heat developed in the iron in 30 seconds is 15000 J.
Explanation:
I = 5 A, R = 20 Î and t = 30 s
H = I2Rt = 52 x 20 x 30 = 25 x 20 x 30 = 15000 J
APPEARS IN
संबंधित प्रश्न
Name any two effects of electric current.
How does the resistance of a wire vary with its:
diameter?
Write down the formula for the heat produced when a current I is passed through a resistor R for time t.
A heating coil has a resistance of 200 Ω. At what rate will heat be produced in it when a current of 2.5 A flows through it?
The heat produced by passing an electric current through a fixed resistor is proportional to the square of:
(a) magnitude of resistance of the resistor
(b) temperature of the resistor
(c) magnitude of current
(d) time for which current is passed
An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at 'minimum heating' it consumes a power of 360 W but at 'maximum heating' it takes a power of 840 W. Calculate the current and resistance in each case.
The heating element of an electric iron is made up of:
What are the uses of electromagnets?
If 220 V potential difference is applied across an electric bulb, a current of 0.45 A flows in the bulb. What must be the power of the bulb?
Tara, after completing her exams, went to her grandmother's house along with her younger brother Rahul. One day, Rahul came home after playing and switched on the fan and air conditioner. At the same time, his grandmother was preparing a milkshake for him using a mixer. Suddenly, they heard a big sound and the electricity of the house got shut down. Tara is called an electrician. He said the main reason for supply to shut down was overloading.
- What is overloading?
- Is overloading and short the same? When does short-circuiting take place?
- How can the effects of overloading be avoided?
