Advertisements
Advertisements
Question
State the formula for calculating length if:
Number of vernier scale division coinciding with the main scale and number of division of main scale on the left-hand side of zero of vernier scale is known.
Advertisements
Solution
If we know the number of vernier scale divisions (V.S.D.) coinciding with the main scale and a number of main scale divisions (M.S.D.) on the left-hand side of zero of vernier scale then Length recorded = Main scale reading + L.C. × V.S.D.
APPEARS IN
RELATED QUESTIONS
Name the two scales of a vernier callipers and explain how it is used to measure length correct up to 0.01 cm.
Explain the terms : Least count of a screw gauge.
How are they determined?
(a) A vernier scale has 20 divisions. It slides over the main scale, whose pitch is 0.5 mm. If the number of divisions on the left hand of the zero of vernier on the main scale is 38 and the 18th vernier scale division coincides with the main scale, calculate the diameter of the sphere, held in the jaws of vernier callipers.
(b) If the vernier has a negative error of 0.04 cm, calculate the corrected radius of the sphere.
Which part of vernier callipers is used to measure the internal length of a hollow cylinder?
Define the least count of an instrument.
The following diagrams (Fig. 5) show the use of a vernier caliper under three different situations. Study the diagrams carefully and note down the vernier readings in each case.
(a) Measuring the diameter of the rod
(b) Measuring Internal diameter of a cavity
(c) Measuring depth of a cavity
The main scale reading while measuring the thickness of a rubber ball using Vernier caliper is 7 cm and the Vernier scale coincidence is 6. Find the radius of the ball.
