Advertisements
Advertisements
Questions
Purification of aluminium by electrolytic refining is carried out by
(a)Hoope process
(b)Hall process
(c)Baeyer process
(d)Serperck process
Purification of aluminium by electrolytic refining is called:
(1) Serpeck’s process
(2) Hoope’s process
(3) Hall’s process
(4) Baeyer’s process
Advertisements
Solution
Hoope process
APPEARS IN
RELATED QUESTIONS
Out of C and CO, which is a better reducing agent at the lower temperature range in the blast furnace to extract iron from the oxide ore?
Mention names and formulae of two ores of alumunium.
Draw neat and labelled diagram of Bessermer converter used in the extraction of copper.
What is the role of CO in the extraction of Iron?
Indicate the principle behind the method used for the refining of zinc.
Which form of the iron is the purest form of commercial iron?
Name the method used for refining of copper metal.
Which of the ores mentioned can be concentrated by magnetic separation method?
Write the names and chemical formulae of any ‘two’ minerals of aluminium.
Which among the following minerals does NOT contain aluminium?
(a) Cryolite
(b) Siderite
(c) China clay
(d) Corundum
Why does copper obtained in the extraction from copper pyrites have a blistered appearance?
What is the role of the following compound-
SiO2 in the extraction of copper from copper pyrites?
Copper has the face centred cubic structure. The coordination number of each ion is:
A current liberates 0.50 g of hydrogen in 2 hours. The weight of copper (at. wt. = 63.5) deposited at the same time by the same current through copper sulphate solution is ______.
What happens when a nickel rod is dipped into a copper sulphate solution? Justify your answer.
[\[\ce{E{^{\circ}_{Ni^{+2}/Ni}}}\] = − 0.25 V and \[\ce{E{^{\circ}_{Cu^{+2}/Cu}}}\] = +0.34 V]
Bauxite has the composition
What are the differences between minerals and ores?
Give the uses of zinc.
The sulphide ore of iron is ____________.
Which of the following options are correct?
(i) Cast iron is obtained by remelting pig iron with scrap iron and coke using hot air blast.
(ii) In extraction of silver, silver is extracted as cationic complex.
(iii) Nickel is purified by zone refining.
(iv) Zr and Ti are purified by van Arkel method.
Which of the following reactions occur during calcination?
(i) \[\ce{CaCo3 -> CaO + CO2}\]
(ii) \[\ce{2FeS2 + 11/2 O2 -> Fe2O3 + 4SO2}\]
(iii) \[\ce{Al2O3. {x}H2O -> Al2O3 + {x}H2O}\]
(iv) \[\ce{ZnS + 3/2 O2 -> ZnO + SO2}\]
Write the chemical reactions involved in the extraction of gold by cyanide process. Also give the role of zinc in the extraction.
In the electrolytic process for the extraction of aluminium the electrolyte is:-
Metal always found in Free State is
When compared to ΔG° for the formation of Al2O3 ΔG° for the formation of Cr2O3 is
