Advertisements
Advertisements
Question
Name a common device where a gear train is used
Advertisements
Solution
A clock is a common device where a gear train is used. In a clock, the gear system is used to obtain the gain in torque.
APPEARS IN
RELATED QUESTIONS
Define 1 J of work.
Work done by a boy depends on the time in which he does work.
State the S.I. unit of energy.
A machine raises a load of 750 N through a height of 16 m in 5 s. calculate:
- energy spent by machine,
- power at which the machine works.
What is the ratio of SI units to CGS units of 'work'?
A truck driver can load oil drums into the back of the truck by pushing them up a sloping plank, or by lifting them directly. Each drum has a mass of 80 kg, the plank is 3 m long, and the back of the truck is 0.8 m above the ground.
(i) How much force would be needed to lift a drum into the truck directly/without using the plank? (Take g = 10 m/s2)
(ii) How much energy would be required in lifting the drum into the truck without the plank?
(iii) If the force needed to push the drum up the plank is 300 N, why is this less than the answer to part (i)?
(iv) When the truck is loaded, the driver drives off. List the major energy changes that take place in moving the truck.
(v) The driver has to stop at the factory gates. What happens to the kinetic energy of the truck?
A force is applied on a body of mass 20 kg moving with a velocity of 40 ms−1. The body attains a velocity of 50 ms−1 in 2 seconds. Calculate the work done by the body.
What is power? How do you differentiate kilowatt from kilowatt-hour? The Jog Falls in Karnataka state are nearly 20 m high. 2000 tonnes of waterfalls from it in a minute. Calculate the equivalent power if all this energy can be utilized? (g = 10 m s–2)
