Advertisements
Advertisements
Question
In one method of rust prevention, the iron is not coated with anything. Which is this method?
Advertisements
Solution
Alloying of iron with chromium and nickel to produce stainless steel (that does not corrode) is one method where iron is not coated with anything.
APPEARS IN
RELATED QUESTIONS
Give two examples of alloys with their chemical composition.
Give reasons:
Platinum, gold and silver are used to make jewellery.
Write a chemical equation to show the process of corrosion of iron.
Fill in the following blank with suitable word:
The process of depositing a thin layer of zinc on iron articles is called .............
Name an alloy of copper. State its chemical composition and any one use.
Corrosion can be an advantage in some case.Explain ?
Compare roasting and calcination.
Write three methods of preventing rusting of iron.
Give reason.
A wooden article should be polished.
Explain the term – rusting and give a word equation for the formation of rust. If polished iron nails are kept in three separate test tubes, state the contents in each test tube required, to prove the conditions for rusting.
Corrosion of silver causes a black layer of _______.
When one of the metals in an alloy is mercury the alloy is called _______.
What is rust?
The table shown below gives information about four substances: A, B, C and D.
| SUBSTANCE | MELTING POINT (K) | ELECTRICAL CONDUCTIVITY | |
| SOLID | LIQUID/ AQUEOUS | ||
| A | 295 | Good | Good |
| B | 1210 | Poor | Good |
| C | 1890 | Poor | Good |
| D | 1160 | Poor | Poor |
Identify Ionic compounds from the above given substances.
Identify the correct statement from the following:
Alloys are homogeneous mixtures of a metal with a metal or nonmetal. Which among the following alloys contain non-metal as one of its constituents?
Gold plated ornaments is the example of ______.
Give scientific reasons.
Silver amalgam is used for filling dental cavities.
| A process of forming a thick oxide of aluminium when aluminium is exposed to air. This coat makes it resistant to corrosion. Resistance can be improved by making a layer of oxide thinker. In this technique, the aluminium article is the anode, and the electrolyte is sulphuric acid. The anode reaction results in the formation of a black-coloured film of aluminium oxide on the anode. By putting appropriate dyes in the electrolytic solution, both coloured surface with the decorative finish is achieved. Kitchen articles like anodised such as pressure cookers, pans and frames of sliding windows are applications of this technique. |
- Name the anode and electrolyte used in this technique.
- How can we make aluminium articles made resistant to corrosion?
- Name the technique used to coat the aluminium articles.
