Advertisements
Advertisements
Question
Draw circuit symbols for
a cell
Advertisements
Solution
a cell
APPEARS IN
RELATED QUESTIONS
Redraw the circuit of question 1, putting in an ammeter to measure the current through the resistors and a voltmeter to measure the potential difference across the 12 Ω resistors. What would be the readings in the ammeter and the voltmeter?
Explain with the help of a labelled circuit diagram how you will find the resistance of a combination of three resistors, or resistance R1, R2 and R3, joined in parallel. Also mention how you will connect the ammeter and the voltmeter in the circuit when measuring the current in the circuit and the potential difference across one of the three resistors of the combination.
Observe the following figure which bulb get fuse?
Match the column ‘A’ with column ‘B’.
|
Column ‘A’
|
Column ‘B’ |
|
(1) Eka - boron
|
(a) Germanium
|
|
(2) Eka - Aluminium
|
(b) Scandium
|
|
(3) Eka - Silicon
|
(c) Gallium |
What do you understand by the closed electric circuit
Draw a neat diagram showing a closed electric circuit.
Name the instrument used to control current in an electric circuit.
What is open circuit?
How much is the potential difference between live and neutral wires?
What is the use of earthing wire?
______ is the device used to close or open an electric circuit.
In the circuit diagram below, 10 units of electric charge move past point x every second What is the current in the circuit ______.
_____ has a thin metallic filament that melts and breaks the connection when the circuit is overheated.
State whether true or false. If false, correct the statement.
Ammeter is connected in parallel in any electric circuit.
When a circuit is open, _____ cannot pass through it.
Assertion: In an open circuit, the current passes from one terminal of the electric cell to another.
Reason: Generally, the metal disc of a cell acts as a positive terminal.
A child has drawn the electric circuit to study Ohm’s law as shown in Figure. His teacher told that the circuit diagram needs correction. Study the circuit diagram and redraw it after making all corrections.
In the following arrangement shown in the following figure, the bulb will not glow if the ends A and B are connected with
Will the bulb glow in the circuit shown in the following figure? Explain.
Overloading of electric circuits can lead to short-circuiting.
