English

A rectangular loop ABCD carrying a current I is situated near a straight conductor XY, such that the conductor is parallel to the side AB of the loop and is in the plane of the loop. - Science

Advertisements
Advertisements

Question

A rectangular loop ABCD carrying a current I is situated near a straight conductor XY, such that the conductor is parallel to the side AB of the loop and is in the plane of the loop. If a steady current I is established in the conductor as shown, the conductor XY will ______.

Options

  • remain stationary

  • move towards the side AB of the loop

  • move away from the side AB 

  • rotate about its axis

MCQ
Fill in the Blanks
Advertisements

Solution

A rectangular loop ABCD carrying a current I is situated near a straight conductor XY, such that the conductor is parallel to the side AB of the loop and is in the plane of the loop. If a steady current I is established in the conductor as shown, the conductor XY will move towards the side AB of the loop.

shaalaa.com
  Is there an error in this question or solution?
2023-2024 (March) Official

RELATED QUESTIONS

Fill in the following blank with suitable words: 

 If a coil is viewed from one end, and the current flows in a clockwise direction, then this end is a ........... pole.


Describe some experiment to show that the magnetic field is associated with an electric current. 


A coil is connected to a galvanometer. When the N-pole of magnet is pushed into the coil, the galvanometer deflected to the right. What deflection, if any, is observed when: 

the magnet is a rest in the coil? 


If fuse of 250 mA, 500 mA, 1 A, 5 A and 10 A were available, which one would be the most suitable for protecting an amplifier rated at 240 V, 180 W?  


In the Activity shown below, how do we think the displacement of rod AB will be affected if

  1. current in rod AB is increased
  2. a stronger horse-shoe magnet is used
  3. length of the rod AB is increased?
  • Take a small aluminium rod AB (of about 5 cm). Using two connecting wires suspend it horizontally from a stand, as shown in Fig.
  • Place a strong horse-shoe magnet in such a way that the rod lies between the two poles with the magnetic field directed upwards. For this put the north pole of the magnet vertically below and south pole vertically above the aluminium rod (Fig.).
  • Connect the aluminium rod in series with a battery, a key and a rheostat.
  • Now pass a current through the aluminium rod from end B to end A.
  • What do you observe? It is observed that the rod is displaced towards the left. You will notice that the rod gets displaced.
  • Reverse the direction of current flowing through the rod and observe the direction of its displacement. It is now towards the right.
  • Why does the rod get displaced?


A current-carrying rod, AB, experiences a force perpendicular to its length and the magnetic field. Support for the magnet is not shown here, for simplicity.


Read the given passage and answer the following questions:

The home electrical connection consists of ‘live’, ‘neutral’ and ‘earth’ wires. The ‘live’ and the ‘neutral’ wires have potential difference of 220 V. The ‘earth’ is connected to ground. Due to a fault in the equipment or if the plastic coating on the ‘live’ and the ‘neutral’ wires gives a way the two wires come in contact with each other and a large current flows through it producing heat. If any inflammable material (such as wood, cloth, plastic, etc.) exists around that place it can catch fire. Therefore a fuse wire is used as a precautionary measure.

  1. Name the two wires having potential difference of 220 V.
  2. What is a short circuit?
  3. Write the function of a fuse.

A soft iron bar is introduced inside the current-carrying solenoid. The magnetic field inside the solenoid ____________.


Boojho made an electromagnet by winding 50 turns of wire over an iron screw. Paheli also made an electromagnet by winding 100 turns over a similar iron screw. Which electromagnet will attract more pins? Give reason.


How does the magnetic effect of electric current help in the working of an electric bell? Explain with the help of a diagram.


What are MCBs? How do they work?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×