Advertisements
Advertisements
प्रश्न
What is “semi permeable membrane”?
Advertisements
उत्तर
Continuous sheets or films (natural or synthetic) which contain a network of submicroscopic holes or pores through which small solvent molecules like water can pass; but the passage of bigger molecules of solute is hindered, are known as semi permeable membrane. Diffusion taking place by this membrance is called Osmosis.
APPEARS IN
संबंधित प्रश्न
What role does the molecular interaction play in a solution of alcohol and water?
Vapour pressure of pure acetone and chloroform at 328 K are 741.8 mm Hg and 632.8 mm Hg respectively. Assuming that they form ideal solution over the entire range of composition, plot `p_"total"`, `p_"chloroform"` and `p_"acetone"` as a function of `chi_"acetone"`. The experimental data observed for different compositions of mixtures is:
| `bb(100 xx chi_"acetone")` | `bb(P_"acetone"//"mm Hg")` | `bb(p_"chloroform"//"mm Hg")` |
| 0 | 0 | 632.8 |
| 11.8 | 54.9 | 548.1 |
| 23.4 | 110.1 | 469.4 |
| 36 | 202.4 | 359.7 |
| 50.8 | 322.7 | 257.7 |
| 58.2 | 405.9 | 193.6 |
| 64.5 | 454.1 | 161.2 |
| 72.1 | 521.1 | 120.7 |
Plot this data also on the same graph paper. Indicate whether it has a positive or negative deviation from the ideal solution.
The KH for the solution of oxygen dissolved in water is 4 × 104 atm at a given temperature. If the partial pressure of oxygen in air is 0.4 atm, the mole fraction of oxygen in solution is ______.
The mass of a non – volatile solute (molar mass 80 g mol-1) should be dissolved in 92g of toluene to reduce its vapour pressure to 90% ______.
For ideal solution the enthalpy of mixing of the pure components to form the solution is ____________.
The rate at which a solid dissolves in liquid does not depend on ____________.
If two liquids A and B form minimum boiling azeotrope at some specific composition then ______.
Concentration terms such as mass percentage, ppm, mole fraction and molality are independent of temperature, however molarity is a function of temperature. Explain.
Assertion: Molarity of a solution in liquid state changes with temperature.
Reason: The volume of a solution changes with change in temperature.
Assertion: When a solution is separated from the pure solvent by a semipermeable membrane, the solvent molecules pass through it from pure solvent side to the solution side.
Reason: Diffusion of solvent occurs from a region of high concentration solution to a region of low concentration solution.
Explain the terms ideal and non-ideal solutions in the light of forces of interactions operating between molecules in liquid solutions.
Upon increase in pressure for dissociation N2O4 into NO2, equilibrium shift towards
Dissociation constant and molar conductance of an acetic acid solution are 1.78 × 10–5 mol L–1 and 48.15 S cm–2 mol–1 respectively. The conductivity of the solution is (considering molar conductance at infinite dilution is 390.5 S cm–2 mol–1)
Which of the following gave the idea of a nucleus of the atom?
Lowering of vapour pressure of an aqueous solution of a non-volatile, non-electrolyte 1 molal aqueous solution at 100°C is ______.
While titration dilute HCl solution with aqueous NaOH, which of the following will not be required?
If liquids A and B form an ideal solution, the ______.
Assertion (A): The enthalpy of mixing Δmix H is equal to zero for an ideal solution.
Reason (R): For an ideal solution the interaction between solute and solvent molecules is stronger than the interactions between solute-solute or solvent-solvent molecules.
Suggest the most important type of intermolecular attractive interaction in the following pair.
NaClO4 and water
Suggest the most important type of intermolecular attractive interaction in the following pair.
Methanol and acetone
