Advertisements
Advertisements
प्रश्न
Show that in an a.c. circuit containing a pure inductor, the voltage is ahead of current by π/2 in phase ?
Advertisements
उत्तर
AC voltage applied to an inductor
Source, v = vm sin ωt
Using Kirchhoff’s loop rule,
`sum epsi(t) =0`
`v - (Ldi)/dt =0 `
`(di)/dt =v/L =v_m/L sin omegat`
Integrating di/dt with respect to time,
`int (di)/dt dt =v_m/L int sin(omega)dt`
`i=-(v_m)/omegaL cos (omegat) +`constant
`-cos omegat = sin(omegat -pi/2)`
`therefore i =i_msin (omegat - pi/2)`
`because`Where,`i_m = (v_m)/(omegaL)`is the amplitude of current
APPEARS IN
संबंधित प्रश्न
Define 'quality factor' of resonance in a series LCR circuit. What is its SI unit?
A series LCR circuit is connected to a source having voltage v = vm sin ωt. Derive the expression for the instantaneous current I and its phase relationship to the applied voltage.
Obtain the condition for resonance to occur. Define ‘power factor’. State the conditions under which it is (i) maximum and (ii) minimum.
An inductor-coil of resistance 10 Ω and inductance 120 mH is connected across a battery of emf 6 V and internal resistance 2 Ω. Find the charge which flows through the inductor in (a) 10 ms, (b) 20 ms and (c) 100 ms after the connections are made.
In a series, LCR circuit, obtain an expression for the resonant frequency,
Draw a labelled graph showing a variation of impedance of a series LCR circuit with frequency of the a.c. supply.
Derive an expression for the average power dissipated in a series LCR circuit.
For a series LCR-circuit, the power loss at resonance is ______.
In an LCR circuit having L = 8 henery. C = 0.5 µF and R = 100 ohm in series, the resonance frequency in radian/sec is
A series LCR circuit containing a 5.0 H inductor, 80 µF capacitors, and 40 Ω resistor is connected to a 230 V variable frequency ac source. The angular frequencies of the source at which power is transferred to the circuit are half the power at the resonant angular frequency are likely to be ______.
A series RL circuit with R = 10 Ω and L = `(100/pi)` mH is connected to an ac source of voltage V = 141 sin (100 πt), where V is in volts and t is in seconds. Calculate
- the impedance of the circuit
- phase angle, and
- the voltage drop across the inductor.
