Advertisements
Advertisements
प्रश्न
Right or wrong sentence.
Increasing the current passing through the wire decreases the magnetic field intensity.
पर्याय
Right
Wrong
Advertisements
उत्तर
The given sentence is wrong.
Explanation:
The magnetic field intensity around a current-carrying wire is directly proportional to the amount of current passing through it (B ∝ I). Therefore, increasing the current will actually increase the strength of the magnetic field, not decrease it.
APPEARS IN
संबंधित प्रश्न
Draw circuit symbols for
a battery of three cells
Draw circuit symbols for
an open switch
Draw the labelled diagram of an electric circuit comprising of a cell, a resistance, an ammeter, a voltmeter and a closed switch (or closed plug key). Which of the two has a large resistance : an ammeter or a voltmeter?
How does the short circuit form?
Two tungsten bulbs of power 50 W and 60 W work on 220 V potential difference. If they are connected in parallel, how much current will flow in the main conductor?
The following figure shows the symbols for components used in the accompanying electrical circuit. Place them at proper places and complete the circuit.
Which law can you prove with the help of above circuit?
In an electric circuit, electron flow a from of point of ______ potential to the point of ______ potential.
Match the column ‘A’ with column ‘B’.
|
Column ‘A’
|
Column ‘B’ |
|
(1) Eka - boron
|
(a) Germanium
|
|
(2) Eka - Aluminium
|
(b) Scandium
|
|
(3) Eka - Silicon
|
(c) Gallium |
Answer the following question.
With the help of a suitable circuit diagram prove that the reciprocal of the equivalent resistance of a group of resistances joined in parallel is equal to the sum of the reciprocals of the individual resistances.
Find the odd one out and give its explanation.
What is the potential difference?
Write scientific reason.
It is beneficial to carry electrical energy in AC form as it is carried over long distances.
Higher Order Question
A student made a circuit by using an electric cell, a switch, a torch bulb (fitted in the bulb holder), and copper connecting wires. When he turned on the switch, the torch bulb did not glow at all. The student checked the circuit and found that all the wire connections were tight.
- What could be the possible reason for the torch bulb not glowing even when the circuit appears to be complete?
Fuse is
_____ has a thin metallic filament that melts and breaks the connection when the circuit is overheated.
Three bulbs are connected end to end from the battery. This connection is called _______.
Assertion: People struck by lightning receive a severe electrical shock.
Reason: Lightning carries very high voltage.
In a simple circuit, why does the bulb glow when you close the switch?
What is the role of the earth wire in domestic circuits?
A device that is used to break an electric circuit is called ______.
Instead of metal wires, a jute string can be used to make a circuit.
Assertion: In an open circuit, the current passes from one terminal of the electric cell to another.
Reason: Generally, the metal disc of a cell acts as a positive terminal.
______ is a kind of fish which is able to produce an electric current.
What are the types of electric circuits?
In the following circuits (Figure), heat produced in the resistor or combination of resistors connected to a 12 V battery will be
 |
 |
 |
| (i) | (ii) | (iii) |
In an electrical circuit three incandescent bulbs A, B and C of rating 40 W, 60 W and 100 W respectively are connected in parallel to an electric source. Which of the following is likely to happen regarding their brightness?
In an electric circuit, the current starts from ______.
Choose the statement which is not correct in the case of an electric fuse.
In an electric circuit a fuse is a ______ ______ to prevent possible fire.
Observe the circuit given:
1. Would any of the bulbs glow when the switch is in the ‘OFF’ position?
2. What will be the order in which the bulbs A, B, and C will glow when the switch is moved to the ‘ON’ position?
In the following arrangement shown in the following figure, the bulb will not glow if the ends A and B are connected with
In which of the following circuits A, B and C given in the following figure, the cell will be used up very rapidly?
A complete circuit is left on for several minutes, causing the connecting copper wire to become hot. As the temperature of the wire increases, the electrical resistance of the wire
Assertion: People struck by lightning receive a severe electrical shock.
Reason: Lightning carries very high voltage.
