Advertisements
Advertisements
प्रश्न
If heat is supplied to a solid, its temperature
(a) must increase
(b) may increase
(c) may remain constant
(d) may decrease
Advertisements
उत्तर
(b) may increase
(c) may remain constant
When heat is supplied to a solid, it is used up either to increase the temperature of the body or to change its state from one form to another by breaking the bonds between the molecules (without raising the temperature).
When heat is supplied to the solid, the internal energy of the solid increases, so the temperature does not decrease.
APPEARS IN
संबंधित प्रश्न
A metal sphere cools at the rate of 4°C / min. when its temperature is 50°C. Find its rate of cooling at 45°C if the temperature of surroundings is 25°C.
A pinhole is made in a hollow sphere of radius 5 cm whose inner wall is at temperature 727oC. Find the power radiated per unit area. [Stefan’s constant σ = 5.7 x 10-8 J/m2 s K4 , emissivity (e) = 0.2]
The susceptibility of magnesium at 300 K is 2.4 x 10-5. At what temperature will the susceptibility increase to 3.6 x 10-5?
The substance which allows heat radiations to pass through is _______.
(A) iron
(B) water vapour
(C) wood
(D) dry air
Can the bulb of a thermometer be made of an adiabatic wall?
The density of water at 4°C is supposed to be 1000 kg m–3. Is it same at sea level and at high altitude?
A body A is placed on a railway platform and an identical body B in a moving train. Which of the following energies of B are greater than those of A, as seen from the ground?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
Water equivalent of a body is measured in ___________ .
The mechanical equivalent of heat ____________ .
A resistance thermometer reads R = 20.0 Ω, 27.5 Ω, and 50.0 Ω at the ice point (0°C), the steam point (100°C) and the zinc point (420°C), respectively. Assuming that the resistance varies with temperature as Rθ = R0 (1 + αθ + βθ2), find the values of R0, α and β. Here θ represents the temperature on the Celsius scale.
A metre scale made of steel is calibrated at 20°C to give correct reading. Find the distance between the 50 cm mark and the 51 cm mark if the scale is used at 10°C. Coefficient of linear expansion of steel is 1.1 × 10–5 °C–1.
A railway track (made of iron) is laid in winter when the average temperature is 18°C. The track consists of sections of 12.0 m placed one after the other. How much gap should be left between two such sections, so that there is no compression during summer when the maximum temperature rises to 48°C? Coefficient of linear expansion of iron = 11 × 10–6 °C–1.
A pendulum clock shows correct time at 20°C at a place where g = 9.800 m s–2. The pendulum consists of a light steel rod connected to a heavy ball. It is taken to a different place where g = 9.788 m s–1. At what temperature will the clock show correct time? Coefficient of linear expansion of steel = 12 × 10–6 °C–1.
A steel ball that is initially at a pressure of 1.0 × 105 Pa is heated from 20°C to 120°C, keeping its volume constant.
Find the pressure inside the ball. Coefficient of linear expansion of steel = 12 × 10–6 °C–1and bulk modulus of steel = 1.6 × 1011 Nm–2.
Two identical beakers A and B contain equal volumes of two different liquids at 60°C each and is left to cool down. Liquid in A has a density of 8 × 102 kg/m3 and specific heat of 2000 J kg-1 K-1 while the liquid in B has a density of 103 kg m-3 and specific heat of 4000 J kg-1 K-1. Which of the following best describes their temperature versus time graph schematically? (assume the emissivity of both the beakers to be the same.)
The temperature of a liquid drops from 365 K to 361 K in 2 min. Find the time during which the temperature of the liquid drops from 344 K to 342 K.
(Take, room temperature = 293 K)
Which conversion is numerically correct for heat energy?
In the formula Q = mcΔT, what does c represent?
What is the best description of heat in thermodynamics?
