Advertisements
Advertisements
प्रश्न
Figure shows a horizontal solenoid connected to a battery and a switch. A copper ring is placed on a frictionless track, the axis of the ring being along the axis of the solenoid. As the switch is closed, the ring will __________ .
पर्याय
remain stationary
move towards the solenoid
move away from the solenoid
move towards the solenoid or away from it depending on which terminal (positive or negative) of the battery is connected to the left end of the solenoid
Advertisements
उत्तर
move away from the solenoid
For the circuit,
`E=-L(di)/(dt)`
The current will increase in the solenoid, flowing in clockwise direction in the circuit. Due to this increased current, the flux linked with the copper ring with increase with time, causing an induced current. This induced current will oppose the cause producing it. Hence, the current in the copper ring will be in anticlockwise direction. Now, because the directions of currents in the solenoid and ring are opposite, the ring will be repelled and hence will move away from the solenoid.
APPEARS IN
संबंधित प्रश्न
A square loop MNOP of side 20 cm is placed horizontally in a uniform magnetic field acting vertically downwards as shown in the figure. The loop is pulled with a constant velocity of 20 cm s−1 till it goes out of the field.
(i) Depict the direction of the induced current in the loop as it goes out of the field. For how long would the current in the loop persist?
(ii) Plot a graph showing the variation of magnetic flux and induced emf as a function of time.
Draw a schematic sketch of an ac generator describing its basic elements. State briefly its working principle. Show a plot of variation of
(i) Magnetic flux and
(ii) Alternating emf versus time generated by a loop of wire rotating in a magnetic field.
Figure shows a rectangular loop conducting PQRS in which the arm PQ is free to move. A uniform magnetic field acts in the direction perpendicular to the plane of the loop. Arm PQ is moved with a velocity v towards the arm Rs. Assuming that the arms QR, RS and SP have negligible resistances and the moving arm PQ has the resistance r, obtain the expression for (i) the current in the loop (ii) the force and (iii) the power required to move the arm PQ.
How does the mutual inductance of a pair of coils change when
(i) distance between the coils is increased and
(ii) number of turns in the coils is increased?
A metallic loop is placed in a nonuniform magnetic field. Will an emf be induced in the loop?
The magnetic flux linked with a coil in Wb is given by the equation Φ = 3t2 + 4t + 9. Then the magnitude of induced emf at t = 2 sec will be ______.
The unit of magnetic flux in SI is ______
A coil is placed in a time varying magnetic field. If the number of turns in the coil were to be halved and the radius of wire doubled, the electrical power dissipated due to the current induced in the coil would be: (Assume the coil to be short circuited.)
In a coil of resistance 100 Ω a current is induced by changing the magnetic flux through it. The variation of current with time is shown in the figure. The magnitude of change in flux through the coil is ______.
A circular coil has radius ‘r', number of turns ‘N’ and carries a current ‘I’. Magnetic flux density ‘B’ at its centre is ______.
What is magnetic flux linked with any surface?
What is \[\theta\] in \[\Phi_B=BA\cos\theta\]?
How is a surface handled when calculating flux through a non-uniform magnetic field or a curved surface?
What is the SI unit of magnetic flux?
What is the nature of magnetic flux?
What is the dimensional formula of magnetic flux?
What happens to magnetic flux when magnetic field \[B\] increases while area and orientation remain unchanged?
What happens to magnetic flux when area \[A\] increases while magnetic field and orientation remain unchanged?
Which expression relates induced emf to the change in magnetic flux for a coil of \[N\] turns?
