Advertisements
Advertisements
प्रश्न
With an increase in the temperature, the electrical conductivity of a semiconductor ______.
विकल्प
decreases.
increases.
does not change.
first increases and then decreases.
Advertisements
उत्तर
With an increase in the temperature, the electrical conductivity of a semiconductor increases.
Explanation:
With increase in temperature, the number of electrons from the valence band can jump to the conduction band in semiconductor. Hence, the conductivity of a semiconductor increases.
APPEARS IN
संबंधित प्रश्न
Distinguish between 'intrinsic' and 'extrinsic' semiconductors
The number of silicon atoms per m3 is 5 × 1028. This is doped simultaneously with 5 × 1022 atoms per m3 of Arsenic and 5 × 1020 per m3 atoms of Indium. Calculate the number of electrons and holes. Given that ni= 1.5 × 1016 m−3. Is the material n-type or p-type?
In n-type semiconductor majority carriers and minority carriers are respectively ______.
In p-type semiconductor, the dopant is ______.
The electron and hole concentration in a semiconductor in thermal equilibrium is given by ______.
Sn, C, and Si, Ge are all group XIV elements. Yet, Sn is a conductor, C is an insulator while Si and Ge are semiconductors. Why?
The figure shows a piece of pure semiconductor S in series with a variable resistor R and a source of constant voltage V. Should the value of R be increased or decreased to keep the reading of the ammeter constant, when semiconductor S is heated? Justify your answer
Name the extrinsic semiconductors formed when pure germanium is doped with a Pentavalent impurity. Draw the energy band diagram of extrinsic semiconductors so formed.
In an extrinsic semiconductor, the number density of holes is 4 × 1020 m-3. If the number density of intrinsic carriers is 1.2 × 1015 m-3, the number density of electrons in it is ______.
- Assertion (A): Putting the p-type semiconductor slab directly in physical contact with the n-type semiconductor slab cannot form the pn junction.
- Reason (R): The roughness at contact will be much more than inter atomic crystal spacing and continuous flow of charge carriers is not possible.
