हिंदी

The Wavelength of Light is 589 Nm. What is Its Wavelength in å?

Advertisements
Advertisements

प्रश्न

The wavelength of light is 589 nm. what is its wavelength in Å?

योग
Advertisements

उत्तर

Wavelength of light = 589 nm

1 angstrom = 0.1 nm

We have 589 nm

`589/0.1 = 5890` Angstroms

= 5890Å

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 1: Measurements and Experimentation - Exercise 1 (A) [पृष्ठ १०]

APPEARS IN

सेलिना Concise Physics [English] Class 9 ICSE
अध्याय 1 Measurements and Experimentation
Exercise 1 (A) | Q 4 | पृष्ठ १०

संबंधित प्रश्न

Which of the following measures a small length to high accuracy : metre rule , vernier callipers or screw gauge?


A vernier callipers has its main scale graduated in mm and 10 divisions on its vernier scale are equal in length to 9 mm. When the two jaws are in contact, the zero of the vernier scale is ahead of the zero of the main scale and the 3rd division of the vernier

scale coincides with a main scale division.

Find : (i) The least count and

         (ii) The zero error of the vernier callipers.


Fig., below shows the reading obtained while measuring the diameter of a wire with a screw gauge. The screw advances by 1 division on the main scale when circular head is rotated once.  

Find:
(i) Pitch of the screw gauge,
(ii) Least count of the screw gauge and
(iii) The diameter of the wire.


What is the need for measuring length with vernier callipers?


A micrometre screw gauge has a positive zero error of 7 divisions, such that its main scale is marked in 1/2 mm and the circular scale has 100 divisions. The spindle of the screw advances by 1 division complete rotation.
If this screw gauge reading is 9 divisions on the main scale and 67 divisions on the circular scale for the diameter of a thin wire, calculate

  1. Pitch
  2. L.C.
  3. Observed diameter
  4. Corrected diameter

State the formula for calculating the pitch of screw.


The pitch of a screw gauge is 0.5 mm and the head scale is divided into 100 parts. What is the least count of screw gauge?

State whether the following statement is true or false by writing T/F against it.

The least count of a screw gauge can be lowered by increasing the number of divisions on its thimble.


An instrument that is used to measure the diameter of a cricket ball is ______.


A vernier caliper using the scale invented by Galileo.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×