Advertisements
Advertisements
प्रश्न
State the purpose of ratchet in a screw gauge.
Advertisements
उत्तर
Ratchet helps to advance the screw by turning it until the object is gently held between the stud and spindle of the screw.
APPEARS IN
संबंधित प्रश्न
Name the two scales of a vernier callipers and explain how it is used to measure length correct up to 0.01 cm.
The pitch of a screw gauge is 1 mm and the circular scale has 100 divisions. In measurement of the diameter of a wire, the main scale reads 2 mm and 45th mark on the circular scale coincides with the base line. Find
(i) The least count and
(ii) The diameter of the wire.
A screw gauge has 50 divisions on its circular scale and its screw moves by 1 mm on turning it by two revolutions. When the flat end of the screw is in contact with the stud, the zero of the circular scale lies below the base line and 4th division of the circular scale is in line with the base line. Find
(i) The pitch,
(ii) The least count and
(iii) The zero error of the screw gauge
What do you understand by the following term as applied to screw gauge?
Zero error
State whether the following statement is true or false by writing T/F against it.
The ratchet of a screw gauge is used to measure the depth of a beaker.
Consider the following case where the zero of vernier scale and the zero of the main scale are clearly seen. If L.C. of the vernier calipers is 0.01 cm, write the zero error and zero correction of the following.
