Advertisements
Advertisements
प्रश्न
State the effect of force F in of the following diagram.
Advertisements
उत्तर
The ball moves in the direction of magnitude of force f and continues to move in that direction
APPEARS IN
संबंधित प्रश्न
A force always produces both the linear and turning motions.
It is easier to turn the steering wheel of a large diameter than that of a small diameter. Given reason.
Give an example for each of the following uses of a machine:
to change the point of application of force
Give an example of the following uses of a machine:
to change the direction of force
Fig. shows a uniform meter scale weighing 100 N pivoted at its centre. Two weights of 500 N and 300 N are hung from the ruler as shown in fig.
(i) Calculate total clockwise and anticlockwise moments.
(ii) Calculate difference in clockwise moment and anticlockwise moment.
(iii) Calculate the distance from O where a 100 N weight should be suspended to balance the meter scale.
A jack screw is provided with a long arm. Explain why?
The diagram shows a uniform metre rule weighing 100gf, pivoted at its centre O. Two weights 150gf and 250gf hang from the point A and B respectively of the metre rule such that OA = 40 cm and OB = 20 cm. Calculate :
the difference of anticlockwise and clockwise moment
Define non-contact forces.
The diagram shows wheel O pivoted at point A. Three equal forces F1, F2 and F3 act at point B on the wheel.
- Which force will produce maximum moment about A?
- Give a reason for your answer in (a).
A door lock is opened by turning the lever (handle) of length 0.2 m. If the moment of force produced is 1 Nm, then the minimum force required is ______.
