Advertisements
Advertisements
प्रश्न
The steering wheel of a vehicle is of large diameter.
Advertisements
उत्तर
The larger the radius the greater the torque. Another way of stating that is that a smaller force on a large wheel could generate the same torque as greater force on a smaller wheel. Hence, the steering wheel of heavy vehicles has a large diameter.
APPEARS IN
संबंधित प्रश्न
A nut is opened by a wrench of length 20 cm. If the least force required is 2N, find the moment of force needed to loosen the nut.
A half metre rod is pivoted at the centre with two weights of 20gf and 12gf suspended at a perpendicular distance of 6 cm and 10 cm from the pivot respectively as shown below.
1) Which of the two forces acting on the rigid rod causes clockwise moment?
2) Is the rod in equilibrium?
3) The direction of 20 kgf force is reversed. What is the magnitude of the resultant moment of the forces on the rod?
Thrust is the ............ force acting on a surface.
SI. unit of moment of force is
Fig. shows a uniform meter scale weighing 100 N pivoted at its centre. Two weights of 500 N and 300 N are hung from the ruler as shown in fig.
(i) Calculate total clockwise and anticlockwise moments.
(ii) Calculate difference in clockwise moment and anticlockwise moment.
(iii) Calculate the distance from O where a 100 N weight should be suspended to balance the meter scale.
Give any two effects of a force on a non-rigid body.
Under what condition will a set of gears produce a gain in torque.
Two unlike forces (parallel) of 10 N and 25 N act at a distance of 12 cm. from each other. Find the point about which the body balance.
A uniform metre rule rests horizontally on a knife-edge at the 60 cm mark when a mass of 10 gram is suspended from one end. At which end must this mass be suspended? What is the mass of the rule?
