Advertisements
Advertisements
प्रश्न
k transparent slabs are arranged one over another. The refractive indices of the slabs are μ1, μ2, μ3, ... μk and the thicknesses are t1 t2, t3, ... tk. An object is seen through this combination with nearly perpendicular light. Find the equivalent refractive index of the system which will allow the image to be formed at the same place.
Advertisements
उत्तर
k number of transparent slabs are arranged one over the other.
Refractive indices of the slabs = μ1, μ2, μ3, ..., μk
Thickness of the slabs = t1, t2, t3,.., tk
Shift due to one slab: \[∆ t = \left[ 1 - \frac{1}{\mu} \right]t\]
For the combination of multiple slabs, the shift is given by,
\[∆ t = \left[ 1 - \frac{1}{\mu_1} \right] t_1 + \left[ 1 - \frac{1}{\mu_2} \right] t_2 + . . . + \left[ 1 - \frac{1}{\mu_k} \right] t_k . . . (i)\]|
Let μ be the refractive index of the combination of slabs.
The image is formed at the same place.
So, the shift will be:
\[\Delta t = \left[ 1 - \left( \frac{1}{\mu} \right) \right]( t_1 + t_2 . . . + t_k ) . . . (ii)\]
Equating (i) and (ii), we get:
\[\left[ 1 - \left( \frac{1}{\mu} \right) \right]( t_1 + t_2 . . . + t_k ) = \left[ 1 - \frac{1}{\mu_1} \right] t_1 + \left[ 1 - \frac{1}{\mu_2} \right] t_2 + \left[ 1 - \frac{1}{\mu_k} \right] t_k \]
\[ = ( t_1 + t_2 . . . + t_k ) - \left( \frac{t_1}{\mu_1} + \frac{t_2}{\mu_2} + \frac{t_k}{\mu_k} \right)\]
\[ = - \frac{1}{\mu} \sum^k_{i = 1} t_i = - \sum^k_{i = 1} \left( \frac{t_i}{\mu_i} \right)\]
\[ \Rightarrow \mu = \frac{\sum^k_{i = 1} t_i}{- \sum^k_{i = 1} \left( \frac{t_i}{\mu_i} \right)}\]
Hence, the required equivalent refractive index is
\[\frac{\sum^k_{i = 1} t_i}{\sum^k_{i = 1} \left( \frac{t_i}{\mu_i} \right)}\]
APPEARS IN
संबंधित प्रश्न
Give a scientific reason:
Danger signal lights are red in colour.
Write two points of difference between the phenomena of interference and diffraction.
In the meterbridge experimental set up, shown in the figure, the null point ‘D’ is obtained at a distance of 40 cm from end A of the meterbridge wire. If a resistance of 10Ω is connected in series with R1, null point is obtained at AD = 60 cm. Calculate the values of R1 and R2.
A parallel beam of light is incident on a converging lens parallel to its principal axis. As one moves away from the lens on the other side on its principal axis, the intensity of light
A convex lens is made of a material having refractive index
\[1 \cdot 2\] Both the surfaces of the lens are convex. If it is dipped into water (μ = 1.33), it will behave like
A 3 cm tall object is placed at a distance of 7.5 cm from a convex mirror of focal length 6 cm. Find the location, size and nature of the image.
A point source S is placed midway between two converging mirrors having equal focal length f as shown in figure. Find the values of d for which only one image is formed.
Locate the image of the point P as seen by the eye in the figure.

An optical fibre (μ = 1.72) is surrounded by a glass coating (μ = 1.50). Find the critical angle for total internal reflection at the fibre-glass interface.
A container contains water up to a height of 20 cm and there is a point source at the centre of the bottom of the container. A rubber ring of radius r floats centrally on the water. The ceiling of the room is 2.0 m above the water surface. (a) Find the radius of the shadow of the ring formed on the ceiling if r = 15 cm. (b) Find the maximum value of r for which the shadow of the ring is formed on the ceiling. Refractive index of water = 4/3.
Fill in the blank and rewrite the completed statement:
Very fine particles mainly scatter ______ light.
Answer the following question in detail.
Explain the formation of a primary rainbow. For which angular range with the horizontal is it visible?
Answer the following question in detail.
Explain the formation of a secondary rainbow. For which angular range with the horizontal is it visible?
Pick the wrong answer in the context with rainbow.
Explain the formation of primary and secondary rainbow.
A parallel beam of light of wavelength 5890 Å falls normally on a slit of width 0.2 mm. Find the distance between the first minima on the two sides of the central maximum of the diffraction pattern observed on a screen placed in the focal plane of a convex lens of focal length 50 cm. The lens is placed quite close to the slit.
| Case study: Mirage in deserts |
![]() |
|
To a distant observer, the light appears to be coming from somewhere below the ground. The observer naturally assumes that light is being reflected from the ground, say, by a pool of water near the tall object. Such inverted images of distant tall objects cause an optical illusion to the observer. This phenomenon is called mirage. This type of mirage is especially common in hot deserts. Based on the above facts, answer the following question: |
Which of the following phenomena is prominently involved in the formation of mirage in deserts?
A short pulse of white light is incident from air to a glass slab at normal incidence. After travelling through the slab, the first colour to emerge is ______.

