Advertisements
Advertisements
प्रश्न
Identify the mathematical expression for amplitude modulated wave ______.
विकल्प
Ac sin [{ωc + k1vm (t)}t + φ].
Ac sin {ωct + φ + k2 vm (t)}.
(Ac + k2 vm (t)) sin (ωct + φ).
Ac vm (t) sin (ωct + φ).
Advertisements
उत्तर
Identify the mathematical expression for amplitude modulated wave `underline((A_c + k_2 v_m (t)) sin (ω_ct + φ))`.
ω
Modulating signal m(t) = Am sin ωct
Carrier signal c(t) = Ac sin ωct
Modulated signal
`c_m (t) = (A_c + A_m sin ω_m t) sin ωt`
`c_m (t) = A_c [1 + A_m/A_c sin ω_m t] sin ω_mt`
`c_m (t) = (A_c + muA_c sin ω_ct)` as `k = muA_c`
`c_m (t) = (A_c + ksin ω_m t) sin ω_mt`
APPEARS IN
संबंधित प्रश्न
Explain any two factors that justify the need of modulating a low-frequency signal.
Draw a block diagram of a detector for AM signal and show, using necessary processes and the waveforms, how the original message signal is detected from the input AM wave.
For an amplitude modulated wave, the maximum amplitude is found to be 10 V while the minimum amplitude is found to be 2 V. Determine the modulation index μ. What would be the value of μ if the minimum amplitude is zero volt?
How is amplitude modulation achieved?
The frequencies of two side bands in an AM wave are 640 kHz and 660 kHz respectively. Find the frequencies of carrier and modulating signal. What is the bandwidth required for amplitude modulation?
Draw a schematic sketch showing how amplitude modulated signal is obtained by superposing a modulating signal over a sinusoidal carrier wave.
Write two advantages of frequency modulation over amplitude modulation.
Why is frequency modulation preferred over amplitude modulation for transmission of music?
Answer the following question.
If A and B represent the maximum and minimum amplitudes of an amplitude-modulated wave, write the expression for the modulation index in terms of A and B.
Define amplitude modulation in a communication system.
Compute the LC product of a tuned amplifier circuit required to generate a carrier wave of 1 MHz for amplitude modulation.
On radiating (sending out) an AM modulated signal, the total radiated power is due to energy carried by ωc, ωc – ωm and ωc + ωm. Suggest ways to minimise cost of radiation without compromising on information.
Draw the plot of amplitude versus ‘ω’ for an amplitude modulated wave whose carrier wave (ωc) is carrying two modulating signals, ω1 and ω2 (ω2 > ω1).
- Is the plot symmetrical about ωc? Comment especially about plot in region ω < ωc.
- Extrapolate and predict the problems one can expect if more waves are to be modulated.
- Suggest solutions to the above problem. In the process can one understand another advantage of modulation in terms of bandwidth?
An audio signal vm = 20sin2π(1500t) amplitude modulates a carrier vc = 80 sin 2π (100,000t). The value of percent modulation is ______.
The maximum and minimum voltage of an amplitude modulated signal are 60 V and 20 V respectively. The percentage modulation index will be ______.
The maximum amplitude for an amplitude modulated wave is found to be 12V while the minimum amplitude is found to be 3V. The modulation index is 0.6x where x is ______.
