Advertisements
Advertisements
प्रश्न
A pendulum completes 2 oscillations in 5 s. What is its time period? If g = 9.8 m s-2, find its length.
Advertisements
उत्तर
Time period = Total time/total no. of oscillations
= (5/2) s
= 2.5 s
Let 'l' be the length. Then,
`T = 2pisqrt(l/"g")`
or , `2.5 = 2(3.14)sqrt(l/9.8)`
or , 0.398 = `sqrt(l/9.8)`
or , `l = (0.398)^2(9.8)`
or , l = 1.55 m
APPEARS IN
संबंधित प्रश्न
The wavelength of light is 589 nm. what is its wavelength in Å?
A screw gauge has a least count 0.001 cm and zero error +0.007 cm. Draw a neat diagram to represent it.
Which of the following measures a small length to high accuracy : metre rule , vernier callipers or screw gauge?
A vernier callipers has its main scale graduated in mm and 10 divisions on its vernier scale are equal in length to 9 mm. When the two jaws are in contact, the zero of the vernier scale is ahead of the zero of the main scale and the 3rd division of the vernier
scale coincides with a main scale division.
Find : (i) The least count and
(ii) The zero error of the vernier callipers.
Which part of vernier callipers is used to measure the internal length of a hollow cylinder?
The thimble of a screw gauge has 50 divisions for one rotation. The spindle advances 1 mm when the screw is turned through two rotations.
- What is the pitch of the screw?
- What is the least count of screw gauge?
- When the screw gauge is used to measure the diameter of wire the reading on the sleeve is found to be 0.5 mm and reading on thimble is found, 27 divisions. What is the diameter of the wire in centimetres?
In the following figure, the pitch of the screw is 1 mm. Calculate:
(i) the least count of screw gauge and
(ii) the reading represented in the figure.
What is the least count in the case of the following instrument?
vernier calipers
Consider the following case where the zero of vernier scale and the zero of the main scale are clearly seen. If L.C. of the vernier calipers is 0.01 cm, write the zero error and zero correction of the following.
How will you measure the least count of vernier caliper?
