Advertisements
Advertisements
प्रश्न
Advertisements
उत्तर
For measurement of an irregular solid by the displacement method using a measuring cylinder.
a. Fill the graduated cylinder with the water.
b. Record the lower meniscus of water and let the value be V1
c. Tie the solid whose volume is to be measured to a strong string and lower it into the water gently.
d. When the object is completely immersed in water, the level of water rises.
e. Note the reading carefully and let the value be V2
f. The volume of the solid, V = V2 - V1
APPEARS IN
संबंधित प्रश्न
The pitch of a screw gauge is 0.5 mm and the head scale is divided in 100 parts. What is the least count of a screw gauge?
When a screw gauge with a least count of 0.01 mm is used to measure the diameter of a wire, the reading on the sleeve is found to be 1 mm and the reading on the thimble is found to be 27 divisions.
(i) What is the diameter of the wire in cm?
(ii) If the zero error is +0.005 cm, what is the correct diameter?
A pendulum completes 2 oscillations in 5 s. What is its time period? If g = 9.8 m s-2, find its length.
(a) A vernier scale has 20 divisions. It slides over the main scale, whose pitch is 0.5 mm. If the number of divisions on the left hand of the zero of vernier on the main scale is 38 and the 18th vernier scale division coincides with the main scale, calculate the diameter of the sphere, held in the jaws of vernier callipers.
(b) If the vernier has a negative error of 0.04 cm, calculate the corrected radius of the sphere.
Define the term least count as applied to a vernier callipers.
State the formula for calculating the pitch of screw.
In a vernier calipers, (N + 1) divisions of vernier scale coincide with N divisions of main scale. If 1 MSD represents 0.1 mm, the vernier constant (in cm) is ______.
