Advertisements
Advertisements
प्रश्न
Advertisements
उत्तर
For measurement of an irregular solid by the displacement method using a measuring cylinder.
a. Fill the graduated cylinder with the water.
b. Record the lower meniscus of water and let the value be V1
c. Tie the solid whose volume is to be measured to a strong string and lower it into the water gently.
d. When the object is completely immersed in water, the level of water rises.
e. Note the reading carefully and let the value be V2
f. The volume of the solid, V = V2 - V1
APPEARS IN
संबंधित प्रश्न
The size of bacteria is 1 µ. Find the number of bacteria present in 1 m length.
When is a vernier Callipers said to be free from zero error?
A vernier callipers has a zero error of + 0.06 cm. Draw a neat labelled diagram to represent it.
In the vernier callipers, there are 10 divisions on the vernier scale and 1 cm on the main scale is divided into 10 parts. While measuring the length, the zero of the vernier lies just ahead of the 1.8 cm mark and the 4th division of vernier coincides with a main scale division.
(a) Find the length.
(b) If zero error of vernier callipers is -0.02 cm,
What is the correct length ?
A screw gauge has 50 divisions on its circular scale and its screw moves by 1 mm on turning it by two revolutions. When the flat end of the screw is in contact with the stud, the zero of the circular scale lies below the base line and 4th division of the circular scale is in line with the base line. Find
(i) The pitch,
(ii) The least count and
(iii) The zero error of the screw gauge
The main scale of vernier callipers has 10 divisions in a centimetre and 10 vernier scale divisions coincide with 9 main scale divisions. Calculate
- pitch
- L.C. of vernier callipers.
What is the backlash error?
An instrument that is used to measure the diameter of a cricket ball is ______.
