हिंदी

A Lead Bullet Moving at 70 Ms-1 is Brought to Rest on Hitting a Target. If 80% of Its Energy is Converted into Heat Energy, Find the Rise in Temperature (Sp. Heat Cap. of Lead is 140 J/Kgk). - Physics

Advertisements
Advertisements

प्रश्न

A lead bullet moving at 70 ms-1 is brought to rest on hitting a target. If 80% of its energy is converted into heat energy, find the rise in temperature (Sp. Heat cap. Of lead is 140 J/kgK).
संख्यात्मक
Advertisements

उत्तर

Given,initial velocity, u = 70 m/s

final velocity, v = 0 m/s

sp. heat capacity of lead,s = 140 J/kgK

Let Δt be the change in temperature

K.E possessed by the bullet = `1/2` m (70)= 2450m joules

Heat energy = 80% of K.E = `80/100 xx 2450`m = 1960m joules

We know that, H = m s Δt

or, 1960m = m x 140 x Δt

or, Δt = `1960/40` = 14 °C

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 1: Force, Work, Energy and Power - Exercise 5 [पृष्ठ ६०]

APPEARS IN

फ्रैंक Physics - Part 2 [English] Class 10 ICSE
अध्याय 1 Force, Work, Energy and Power
Exercise 5 | Q 6 | पृष्ठ ६०

संबंधित प्रश्न

An object thrown at a certain angle to the ground moves in a curved path and falls back to the ground. The initial and the final points of the path of the object lie on the same horizontal line. What is the work done by the force of gravity on the object?


State two advantage of producing hydroelectricity.


Choose one or more correct alternatives.

For work to be performed, energy must be ______.

  1. transferred from one place to another
  2. concentrated
  3. transformed from one type to another
  4. destroyed

Complete the following sentences:
 Joule is the unit of .......


Write the SI and CGS units of power. How are they related?

A cricket ball is thrown up from the earth's surface. What happens to its P.E.
(a)    during the motion
(b)    at the highest point?


Write the S.I. units of power.

What do you understand by the term energy? Is energy a scalar or vector? How is the energy possessed by a body measured?


A truck driver can load oil drums into the back of the truck by pushing them up a sloping plank, or by lifting them directly. Each drum has a mass of 80 kg, the plank is 3 m long, and the back of the truck is 0.8 m above the ground.

(i) How much force would be needed to lift a drum into the truck directly/without using the plank? (Take g = 10 m/s2)

(ii) How much energy would be required in lifting the drum into the truck without the plank?

(iii) If the force needed to push the drum up the plank is 300 N, why is this less than the answer to part (i)?

(iv) When the truck is loaded, the driver drives off. List the major energy changes that take place in moving the truck.

(v) The driver has to stop at the factory gates. What happens to the kinetic energy of the truck?


A force is applied on a body of mass 20 kg moving with a velocity of 40 ms−1. The body attains a velocity of 50 ms−1 in 2 seconds. Calculate the work done by the body.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×