Advertisements
Advertisements
Question
Name two common material used for heating elements.
Advertisements
Solution
Nichrome and manganin are the common alloys that are mostly used for making heating elements.
Nichrome is: 60% nickel + 25% iron + 15% chromium.
Manganin is: 83% manganese + 13% copper + 4% nickel.
RELATED QUESTIONS
Name the commercial unit of electric energy.
The commercial unit of energy is :
(a) watt
(b) watt-hour
(c) kilowatt-hour
(d) kilo-joule
A bulb with rating 250 V, 100 W is connected to a power supply of 220 V situated 10 m away using a copper wire of area of cross-section 5 mm2. How much power will be consumed by the connecting wires? Resistivity of copper = 1.7 × 10−8 Ωm
The diagram below shows a magnetic kept just below the conductor AB which is kept in North South direction.
(i) In which direction will the needle deflect when the key is closed ?
(ii) Why is the deflection produced ?
(iii) What will be the change in the deflection if the magnetic needle is taken just above the conductor AB ?
(iv) Name one device which works on this principle.
Why is heating coil wound in the form of a helix in electric stove?
Why is a concave reflector placed behind the heating element in a room heater.
An Electric bulb is marked 100 W, 230 V. What how long would this lamp take to consume one unit of electricity?
A bulb is connected to a battery of e.m.f. 6V and internal resistance 2Ω A steady current of 0.5A flows through the bulb. Calculate the resistance of the bulb.
The resistance of filament of an electric heater is 500 Ω It is operated at 200V for 1 hour daily. Calculate the current drawn by the heater and the energy consumed in joule.
The unit of e.m.f. of a cell is ____________.
