Advertisements
Advertisements
Questions
Give reasons:
Platinum, gold and silver are used to make jewellery.
Give a reason for the following:
Silver, gold and platinum are used to make jewellery.
Advertisements
Solution
- Gold, silver, and platinum are the least reactive metals. They do not react with air, water, acids, alkalis, or other gases in the environment, so their shine lasts for years.
- Due to their bright lustre and resistance to corrosion, gold, silver, and platinum are used to make jewellery.
APPEARS IN
RELATED QUESTIONS
Give two examples of alloys with their chemical composition.
Write a chemical equation to show the process of corrosion of iron.
Explain why, through aluminium is more reactive than iron, yet there is less corrosion of aluminium when both are exposed to air.
What are the special properties of stainless steel?
Name an alloy of copper. State its chemical composition and any one use.
Mention two uses of the following metals and non-metals
Iron
No chemical reaction takes place when granules of a solid, A, are mixed with the powder of another solid, B. However when the mixture is heated, a reaction takes place between its components. One of the products, C, is a metal and settles down in the molten state while the other product, D, floats over it. It was observed that the reaction is highly exothermic.
(i) Based on the given information make an assumption about A and B and write a chemical equation for the chemical reaction indicating the conditions of reaction, physical state of reactants and products and thermal status of reaction.
(ii) Mention any two types of reactions under which above chemical reaction can be classified.
Give reason.
An iron article should be given a coat of paint
Give reason.
A wooden article should be polished.
Give reason.
Copper and brass utensils should be tinned.
Observe the following picture and answer the following questions:
- What is rust?
- Write the chemical formula of rust.
- Write the reaction of oxidation of iron at the anode.
- Write the reaction of oxidation of iron at the cathode.
- What is corrosion?
_______ forms a green colour in the water.
Match the columns.
| Group A | Group B |
| 1) Electroplating | a) Pressure cooker |
| 2) Anodising | b) Silver plated spoons |
| c) Coating of tin on copper | |
| d) Coating of Zinc on iron |
Write scientific reason.
On exposure to air, silver articles turn blackish after some time.
Complete flow chart given below.
What is rust?
The table shown below gives information about four substances: A, B, C and D.
| SUBSTANCE | MELTING POINT (K) | ELECTRICAL CONDUCTIVITY | |
| SOLID | LIQUID/ AQUEOUS | ||
| A | 295 | Good | Good |
| B | 1210 | Poor | Good |
| C | 1890 | Poor | Good |
| D | 1160 | Poor | Poor |
Identify Ionic compounds from the above given substances.
Identify the correct statement from the following:
A man painted his main gate made up of iron, to
- prevent it from rusting.
- protect it from sun.
- make it look beautiful.
- make it dust free.
Which of the above statement(s) is/are correct?
| A process of forming a thick oxide of aluminium when aluminium is exposed to air. This coat makes it resistant to corrosion. Resistance can be improved by making a layer of oxide thinker. In this technique, the aluminium article is the anode, and the electrolyte is sulphuric acid. The anode reaction results in the formation of a black-coloured film of aluminium oxide on the anode. By putting appropriate dyes in the electrolytic solution, both coloured surface with the decorative finish is achieved. Kitchen articles like anodised such as pressure cookers, pans and frames of sliding windows are applications of this technique. |
- Name the anode and electrolyte used in this technique.
- How can we make aluminium articles made resistant to corrosion?
- Name the technique used to coat the aluminium articles.
