Advertisements
Advertisements
Questions
Define mutual inductance.
Define the term 'mutual inductance' between the two coils.
Advertisements
Solution
Mutual inductance is the property of two coils by the virtue of which each opposes any change in the value of current flowing through the other by developing an induced emf.
APPEARS IN
RELATED QUESTIONS
If the radius of a sphere is doubled without changing the charge on it, then electric flux originating from the sphere is ______.
A long solenoid with 15 turns per cm has a small loop of area 2.0 cm2 placed inside the solenoid normal to its axis. If the current carried by the solenoid changes steadily from 2.0 A to 4.0 A in 0.1 s, what is the induced emf in the loop while the current is changing?
Explain self induction and mutual induction
Find the mutual inductance between the straight wire and the square loop of figure.
Alternating current of peak value `(2/pi)` ampere flows through the primary coil of transformer. The coefficient of mutual inductance between primary and secondary coil is 1 H. The peak e.m.f. induced in secondary coil is ______. (Frequency of a.c. = 50 Hz)
The mutual inductance of a pair of coils is 0.75 H. If current in the primary coil changes from 0.5 A to zero in 0.01 s, find average induced e.m.f. in secondary coil ______.
An emf of 91 mV is induced in the windings of a coil when the current in o nearby coil is increasing at the rate of 1.3 A/s. what is the mutual inductance (M) of the two coils in mH?
A plane loop is shaped in the form as shown in figure with radii a = 20 cm and b = 10 cm and is placed in a uniform time varying magnetic field B = B0 sin ωt, where B0 = 10 mT and ω = 100 rad/s. The amplitude of the current induced in the loop if its resistance per unit length is equal to 50 × 10-3 Ω/m. The inductance of the loop is negligible is ______ A.
State and define the SI unit of mutual inductance.
The mutual inductance between a primary and secondary circuit is 0.4 H and the resistance in these circuits are \[20\Omega\] and \[4\Omega\] respectively. To produce a current of 0.5 A in the secondary, current in the primary must be changed at the rate of ______.
