Advertisements
Advertisements
Question
Define the capacitance of a capacitor. Obtain the expression for the capacitance of a parallel plate capacitor in vacuum in terms of plate area A and separation d between the plates.
Advertisements
Solution
The capacitance of a capacitor is the amount of charge which creates unit potential difference between collecting plate and condensing plate after giving charge on the collecting plate.
Parallel Plate Capacitor
-
A parallel plate capacitor consists of two large plane parallel conducting plates separated by a small distance.
-
Let A be the area of each plate and d the separation between them. The two plates have charges Q and −Q.
-
Surface charge density of plate 1, σ = Q/A, and that of plate 2 is σ.
-
Electric field in different regions:
Outer region I,
`E = σ/(2ε_0) - σ/(2ε_0 ) = 0`
In the inner region between plates 1 and 2, the electric fields due to the two charged plates add up. So,
\[E = \frac{\sigma}{2 \epsilon_0} + \frac{\sigma}{2 \epsilon_0} = \frac{\sigma}{\epsilon_0} = \frac{Q}{\epsilon_0 A}\]
E=σ2ε0+σ2ε0=σε0=Qε0
-
The direction of electric field is from the positive to the negative plate.
-
For uniform electric field, potential difference is simply the electric field multiplied by the distance between the plates, i.e.
`V=Ed = 1/c (Qd)/A`
Capacitance C of the parallel plate capacitor in vacuum is
`C = Q/V =(ε_0A)/d `
APPEARS IN
RELATED QUESTIONS
What is the area of the plates of a 2 F parallel plate capacitor, given that the separation between the plates is 0.5 cm? [You will realize from your answer why ordinary capacitors are in the range of µF or less. However, electrolytic capacitors do have a much larger capacitance (0.1 F) because of very minute separation between the conductors.]
The plates of a parallel plate capacitor have an area of 90 cm2 each and are separated by 2.5 mm. The capacitor is charged by connecting it to a 400 V supply.
(a) How much electrostatic energy is stored by the capacitor?
(b) View this energy as stored in the electrostatic field between the plates, and obtain the energy per unit volume u. Hence arrive at a relation between u and the magnitude of electric field E between the plates.
A slab of material of dielectric constant K has the same area as the plates of a parallel plate capacitor but has a thickness \[\frac{3d}{4}\]. Find the ratio of the capacitance with dielectric inside it to its capacitance without the dielectric.
In a parallel plate capacitor with air between the plates, each plate has an area of 6 × 10−3m2 and the separation between the plates is 3 mm.
- Calculate the capacitance of the capacitor.
- If this capacitor is connected to 100 V supply, what would be the charge on each plate?
- How would charge on the plates be affected, if a 3 mm thick mica sheet of k = 6 is inserted between the plates while the voltage supply remains connected?
A slab of material of dielectric constant K has the same area as that of the plates of a parallel plate capacitor but has the thickness d/3, where d is the separation between the plates. Find out the expression for its capacitance when the slab is inserted between the plates of the capacitor.
A parallel-plate capacitor of plate area 40 cm2 and separation between the plates 0.10 mm, is connected to a battery of emf 2.0 V through a 16 Ω resistor. Find the electric field in the capacitor 10 ns after the connections are made.
For a one dimensional electric field, the correct relation of E and potential V is _________.
Two charges – q each are separated by distance 2d. A third charge + q is kept at mid point O. Find potential energy of + q as a function of small distance x from O due to – q charges. Sketch P.E. v/s x and convince yourself that the charge at O is in an unstable equilibrium.
A parallel plate capacitor is charged by connecting it to a battery through a resistor. If I is the current in the circuit, then in the gap between the plates:
A parallel plate capacitor is charged by connecting it to a battery through a resistor. If I is the current in the circuit, then in the gap between the plates, there is no conduction current:
