Advertisements
Advertisements
प्रश्न
Which logic gate corresponds to the truth table given below?
|
A |
B |
Y |
|
0 |
0 |
I |
|
0 |
1 |
0 |
|
1 |
0 |
0 |
|
1 |
1 |
0 |
पर्याय
AND
NOR
OR
NAND
Advertisements
उत्तर
NOR
APPEARS IN
संबंधित प्रश्न
The following figure shows the input waveforms (A, B) and the output waveform (Y) of a gate. Identify the gate, write its truth table and draw its logic symbol.
You are given the two circuits as shown in following figure. Show that circuit
- acts as OR gate while the circuit
- acts as AND gate.
(a)
(b)
Write the truth table for a NAND gate connected as given in the following figure.
Hence identify the exact logic operation carried out by this circuit
Write the truth table for the circuits given in following figure consisting of NOR gates only. Identify the logic operations (OR, AND, NOT) performed by the two circuits.
(a)
(b)
Draw the schematic symbols for AND, OR, NOT and NAND gate
Draw logic symbol of an OR gate and write its truth table.
Answer the following question :
Distinguish between digital and analogue signals.
What will be the values of input A and B for the Boolean expression `overline ((A +B) .(A*B)) =1?`
An AND gate can be prepared by repetitive use of
(a) NOT gate
(b) OR gate
(c) NAND gate
(d) NOR gate.
Let \[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\] Evaluate X for A = 1, B = 0, C = 1.
Let \[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\] Evaluate X for A = B = C = 0.
Why is the linear portion of the triode characteristic chosen to operate the triode as an amplifier?
Show the variation of voltage with time, for a digital signal.
A radar is sending out pules of 1 micro second duration at interval of 100 micro-second. The range of the radar is
The Boolean expression for NAND gate is
In potential barrier development in a junction diode opposes
A CE amplifier has a voltage gain 50, an input impedance of 1000 ohm 1 and an output impedance of 200 ohm. The power gain of the amplifier will be
The truth table for the following logic circuit is:
Truth table for the given circuit (Figure) is ______.
How would you set up a circuit to obtain NOT gate using a transistor?
Write the truth table for the circuit shown in figure. Name the gate that the circuit resembles.
Draw the output signals C1 and C2 in the given combination of gates (Figure).
In the logic circuit shown in the figure, if input A and B are 0 to 1 respectively, the output at Y would be 'x'. The value of x is ______.
Identify the logic operation carried out by the given circuit:
The given figure shows the waveforms for two inputs A and B and that for the output Y of a logic circuit. The logic circuit is ______.
Which one of the following is the Boolean expression for NOR gate?
