Advertisements
Advertisements
प्रश्न
What is the role of a bandpass filter?
Advertisements
उत्तर
The bandpass filter blocks the signal which is d.c. or has frequencies ω, 2ωc and 2ωm and allows a particular band of the frequency signal to pass.
APPEARS IN
संबंधित प्रश्न
The process of superimposing a low frequency signal on a high frequency wave is_______ .
Define modulation and transducer
Define modulation index.
Why is Modulation index kept low?
The carrier wave of a signal is given by C(t) = 3 sin (8πt) volt. The modulating signal is a square wave as shown. Find its modulation index.
Given modulation index physical significance .For an amplitude modulated wave, the maximum amplitude is found to be 10 V while the minimum amplitude is 2 V. Determine the modulation index μ ?
I-V characteristics of four devices are shown in Figures.
 |
 |
 |
|
| (i) | (ii) | (iii) | (iv) |
Identify devices that can be used for modulation.
A male voice after modulation-transmission sounds like that of a female to the receiver. The problem is due to ______.
An audio signal of 15kHz frequency cannot be transmitted over long distances without modulation because ______.
- the size of the required antenna would be at least 5 km which is not convenient.
- the audio signal can not be transmitted through sky waves.
- the size of the required antenna would be at least 20 km, which is not convenient.
- effective power transmitted would be very low, if the size of the antenna is less than 5 km.
A TV transmission tower antenna is at a height of 20 m. How much service area can it cover if the receiving antenna is (i) at ground level, (ii) at a height of 25 m? Calculate the percentage increase in area covered in case (ii) relative to case (i).
