मराठी

Fill in the Folloing Blanks with Suitable Words: Current is Measured in ............... Using an ............... Placed in ............... in a Circuit.

Advertisements
Advertisements

प्रश्न

Fill in the folloing blank with suitable words:  

 Current is measured in ............... using an ............... placed in ............... in a circuit.

Advertisements

उत्तर

Current is measured in amperes using an ammeter placed in series in a circuit.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 4: Electricity - Exercise 2

APPEARS IN

लखमीर सिंह Physics [English] Class 10
पाठ 4 Electricity
Exercise 2 | Q 15.2

व्हिडिओ ट्यूटोरियलVIEW ALL [1]

संबंधित प्रश्‍न

Calculate the number of electrons constituting one coulomb of charge.


If the current through a floodlamp is 5 A, what charge passed in 10 seconds?

(a) 0.5 C
(b) 2 C
(c) 5 C
(d) 50 C


A battery of 9 V is connected in series with resistors of 0.2 Ω, 0.3 Ω, 0.4 Ω, 0.5 Ω and 0.12 Ω. How much current would flow through the 12 Ω resistor?


Three resistors are connected as shown in the diagram.


Through the resistor 5 ohm, a current of 1 ampere is flowing.

(i) What is the current through the other two resistors?
(ii) What is the p.d. across AB and across AC?
(iii) What is the total resistance


Two lamps, one rated 40 W at 220 V and the other 60 W at 220 V, are connected in parallel to the electric supply at 220 V.  


(a) Draw a circuit diagram to show the connections.
(b) Calculate the current drawn from the electric supply.
(c) Calculate the total energy consumed by the two lamps together when they operate for one hour.


State the relation between work, charge and potential difference for an electric circuit.


An electric kettle is rated 3 kW, 250 V. Give reason whether this kettle can be used in a circuit which contains a 13 A fuse.

An electric bulb is rated at 220 V, 100 W. What is its resistance? What maximum current can be passed through it?

What do you mean by a solenoid?

Tick(✓) the correct choice in the following:

When the length of a conductor is doubled the resistance of the conductor
will


What are the factors on which the resistance of a conductor depends? Distinguish between conductors and insulators.

Tick (✓) the correct choice among the following :
(a) A strong short bar magnet is dropped into a solenoid connected to a
galvanometer as shown in fig . The galvanometer shows a deflection to the left when the current in the coil as seen from above is counter clockwise. Which one of the following shows the correct deflection of the galvanometer when the magnet is at posi tions A, Band C.


Tick (✓) the correct choice among the following :

There are 500 turns and 2000 turns in the primary and secondary coil of a
transformer respectively. If th e output voltage is 1000 V, how large is the
input voltage?


A primary of 800 turns is connected to a 220 V A.C. supply and the secondary has 8 turns. What will be the output voltage?

Define the term kilowatt - hour and state its value in S.I. unit.


An electric bulb is rated 250 W, 230 V. 

  1. the energy consumed in one hour, and
  2. the time in which the bulb will consume 1.0 kWh energy when connected to 230 V mains.

A bulb is connected to a battery of p.d. 4 V and internal resistance 2.5 Ω . A steady current of 0.5 A flows through the circuit. Calculate:

The energy dissipated in the bulb in 10 minutes.


How should the electric lamps in a building be connected?


One unit of electrical energy consumed is equal to 1000 kilowatt-hour.


Name any two devices, which are working on the heating effect of the electric current.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×