Advertisements
Advertisements
प्रश्न
Choose the correct alternative:
The resistivity of a typical insulator (e.g., amber) is greater than that of a metal by a factor of the order of (1022/1023).
Advertisements
उत्तर
The resistivity of a typical insulator (e.g., amber) is greater than that of a metal by a factor of the order of 1022.
APPEARS IN
संबंधित प्रश्न
A negligibly small current is passed through a wire of length 15 m and uniform cross-section 6.0 × 10−7 m2, and its resistance is measured to be 5.0 Ω. What is the resistivity of the material at the temperature of the experiment?
Two wires of equal length, one of aluminium and the other of copper have the same resistance. Which of the two wires is lighter? Hence explain why aluminium wires are preferred for overhead power cables.
(ρAl = 2.63 × 10−8 Ω m, ρCu = 1.72 × 10−8 Ω m, Relative density of Al = 2.7, of Cu = 8.9.)
What conclusion can you draw from the following observations on a resistor made of alloy manganin?
| Current A |
Voltage V |
Current A |
Voltage V |
| 0.2 | 3.94 | 3.0 | 59.2 |
| 0.4 | 7.87 | 4.0 | 78.8 |
| 0.6 | 11.8 | 5.0 | 98.6 |
| 0.8 | 15.7 | 6.0 | 118.5 |
| 1.0 | 19.7 | 7.0 | 138.2 |
| 2.0 | 39.4 | 8.0 | 158.0 |
A heating element is marked 210 V, 630 W. Find the resistance of the element when connected to a 210 V dc source.
Two wires of equal length, one of copper and the other of manganin have the same resistance. Which wire is thicker?
A uniform wire of resistance 100 Ω is melted and recast as a wire whose length is double that of the original. What would be the resistance of the wire?
What length of a copper wire of cross-sectional area 0.01 mm2 will be needed to prepare a resistance of 1 kΩ? Resistivity of copper = 1.7 × 10–8 Ωm
The electrochemical equivalent of a material depends on _______________ .
If R1 and R2 are filament resistances of a 200 W and a 100 W bulb respectively, designed to operate on the same voltage, then:
Choose the correct alternative:
The resistivity of the alloy manganin is nearly independent of/increases rapidly with increase of temperature.
Fuse wire should have
If the last band on the carbon resistor is absent, then the tolerance is ______
How does the resistivity of a metal change with an increase in temperature?
Which of the following describes the temperature dependence of semiconductors?
What is approximately how many times greater is the resistivity of insulators compared to metals?
