Advertisements
Advertisements
प्रश्न
A parallel-plate capacitor of plate area 40 cm2 and separation between the plates 0.10 mm, is connected to a battery of emf 2.0 V through a 16 Ω resistor. Find the electric field in the capacitor 10 ns after the connections are made.
Advertisements
उत्तर
Given:-
Area of plates, A = 40 cm2 = 40 × 10−4 m2
Separation between the plates, d = 0.1 mm = 1 × 10−4 m
Resistance, R = 16 Ω
Emf of the battery,
V0 = 2V
The capacitance C of a parallel plate capacitor,
\[C = \frac{\in_0 A}{d}\]
\[ = \frac{8 . 85 \times {10}^{- 12} \times 40 \times {10}^{- 4}}{1 \times {10}^{- 4}}\]
\[ = 35 . 4 \times {10}^{- 11} F\]
So, the electric field,
\[E = \frac{V}{d} = \frac{Q}{Cd} = \frac{Q_0}{A \in_0} \left( 1 - e^{- \frac{t}{RC}} \right)\]
\[ = \frac{C V_0}{A \in_0} \left( 1 - e^{- \frac{t}{RC}} \right)\]
\[ = \frac{35 . 4 \times {10}^{- 11} \times 2}{8 . 85 \times {10}^{- 12} \times 40 \times {10}^{- 4}} \left( 1 - e^{- 1 . 76} \right)\]
\[ = 1 . 655 \times {10}^4 \]
\[ = 1 . 7 \times {10}^4 V/m\]
APPEARS IN
संबंधित प्रश्न
Draw a neat labelled diagram of a parallel plate capacitor completely filled with dielectric.
Explain briefly the process of charging a parallel plate capacitor when it is connected across a d.c. battery
The plates of a parallel plate capacitor have an area of 90 cm2 each and are separated by 2.5 mm. The capacitor is charged by connecting it to a 400 V supply.
(a) How much electrostatic energy is stored by the capacitor?
(b) View this energy as stored in the electrostatic field between the plates, and obtain the energy per unit volume u. Hence arrive at a relation between u and the magnitude of electric field E between the plates.
A parallel plate capacitor is to be designed with a voltage rating 1 kV, using a material of dielectric constant 3 and dielectric strength about 107 Vm−1. (Dielectric strength is the maximum electric field a material can tolerate without breakdown, i.e., without starting to conduct electricity through partial ionisation.) For safety, we should like the field never to exceed, say 10% of the dielectric strength. What minimum area of the plates is required to have a capacitance of 50 pF?
A slab of material of dielectric constant K has the same area as that of the plates of a parallel plate capacitor but has the thickness d/2, where d is the separation between the plates. Find out the expression for its capacitance when the slab is inserted between the plates of the capacitor.
A parallel plate air condenser has a capacity of 20µF. What will be a new capacity if:
1) the distance between the two plates is doubled?
2) a marble slab of dielectric constant 8 is introduced between the two plates?
Solve the following question.
A parallel plate capacitor is charged by a battery to a potential difference V. It is disconnected from the battery and then connected to another uncharged capacitor of the same capacitance. Calculate the ratio of the energy stored in the combination to the initial energy on the single capacitor.
A parallel plate capacitor is connected to a battery as shown in figure. Consider two situations:
- Key K is kept closed and plates of capacitors are moved apart using insulating handle.
- Key K is opened and plates of capacitors are moved apart using insulating handle.
Choose the correct option(s).
- In A: Q remains same but C changes.
- In B: V remains same but C changes.
- In A: V remains same and hence Q changes.
- In B: Q remains same and hence V changes.
A parallel plate capacitor filled with a medium of dielectric constant 10, is connected across a battery and is charged. The dielectric slab is replaced by another slab of dielectric constant 15. Then the energy of capacitor will ______.
A parallel plate capacitor is charged by connecting it to a battery through a resistor. If I is the current in the circuit, then in the gap between the plates:
For two plates separated by distance \[d\], what is the capacitance of a parallel plate capacitor without a dielectric medium?
What is the surface charge density \[\sigma\] on a plate carrying charge \[Q\] over area \[A\]?
What is the effect of increasing plate area \[A\] on capacitance, and why?
When the electric field is reduced to \[E'=\frac{E}{K}\] by a dielectric, what happens to potential difference and capacitance?
Which description gives the working principle of a parallel plate capacitor?
Where is electrical energy stored in a parallel plate capacitor, and how can it be used?
In electronic circuits, what are filters and oscillators used for?
