Advertisements
Advertisements
प्रश्न
A circular hole of diameter 2.00 cm is made in an aluminium plate at 0°C. What will be the diameter at 100°C? α for aluminium = 2.3 × 10–5 °C–1.
Advertisements
उत्तर
Given:
Diameter of a circular hole in an aluminium plate at 0°C, d1 = 2 cm = 2 × 10–2 m
Initial temperature, t1 = 0 °C
Final temperature, t2 = 100 °C
So, the change in temperature, (Δt) = 100°C - 0°C = 100°C
The linear expansion coefficient of aluminium, αal = 2.3 × 10–5 °C–1
Let the diameter of the circular hole in the plate at 100oC be d2 , which can be written as
d2 = d1(1+αΔt)
⇒ d2 =2 × 10-2(1+2.3×10-5×102)
⇒ d2 = 2×10-2(1+2.3×10-3)
⇒ d2 = 2×10-2+2.3×2×10-5
⇒ d2 = 0.02 +0.000046
⇒ d2 =0.020046 m
⇒ d2 ≈ 2.0046 cm
Therefore, the diameter of the circular hole in the aluminium plate at 100oC is 2.0046 cm.
APPEARS IN
संबंधित प्रश्न
Which of the curves in the following figure represents the relation between Celsius and Fahrenheit temperatures?
Which of the following pairs may give equal numerical values of the temperature of a body?
A body A is placed on a railway platform and an identical body B in a moving train. Which of the following energies of B are greater than those of A, as seen from the ground?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
When a solid melts or a liquid boils, the temperature does not increase even when heat is supplied. Where does the energy go?
Water equivalent of a body is measured in ___________ .
Two bodies at different temperatures are mixed in a calorimeter. Which of the following quantities remains conserved?
Heat and work are equivalent. This means, ____________ .
A concrete slab has a length of 10 m on a winter night when the temperature is 0°C. Find the length of the slab on a summer day when the temperature is 35°C. The coefficient of linear expansion of concrete is 1.0 × 10–5 °C–1.
A metre scale made of steel is calibrated at 20°C to give correct reading. Find the distance between the 50 cm mark and the 51 cm mark if the scale is used at 10°C. Coefficient of linear expansion of steel is 1.1 × 10–5 °C–1.
A railway track (made of iron) is laid in winter when the average temperature is 18°C. The track consists of sections of 12.0 m placed one after the other. How much gap should be left between two such sections, so that there is no compression during summer when the maximum temperature rises to 48°C? Coefficient of linear expansion of iron = 11 × 10–6 °C–1.
Explain the meaning of heat and work with suitable examples.
One day in 1922, the air temperature was measured at 59°C in the shade in Libya ______.
Heat is measured in Celsius or centigrade.
Temperature in the form of energy.
The degree of hotness and coldness of a body is called ______.
Two identical beakers A and B contain equal volumes of two different liquids at 60°C each and is left to cool down. Liquid in A has a density of 8 × 102 kg/m3 and specific heat of 2000 J kg-1 K-1 while the liquid in B has a density of 103 kg m-3 and specific heat of 4000 J kg-1 K-1. Which of the following best describes their temperature versus time graph schematically? (assume the emissivity of both the beakers to be the same.)
What is the SI unit of heat?
Near the melting point of a solid, the heat supplied does NOT raise the temperature. Instead, what does it do?
1 calorie is equal to how many joules?
