मराठी
तामिळनाडू बोर्ड ऑफ सेकेंडरी एज्युकेशनएस.एस.एल.सी. (इंग्रजी माध्यम) इयत्ता ७

______ is used to measure the electric current.

Advertisements
Advertisements

प्रश्न

______ is used to measure the electric current.

रिकाम्या जागा भरा
Advertisements

उत्तर

Ammeter is used to measure the electric current.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 2: Electricity - Evaluation [पृष्ठ ३३]

APPEARS IN

सामाचीर कलवी Science - Term 2 [English] Class 7 TN Board
पाठ 2 Electricity
Evaluation | Q II. 3. | पृष्ठ ३३

संबंधित प्रश्‍न

Three 2 V cells are connected in series and used as a battery in a circuit. 

How many joules of electrical energy does 1 C gain on passing through (i) one cell (ii) all three cells?


A battery of 9 V is connected in series with resistors of 0.2 Ω, 0.3 Ω, 0.4 Ω, 0.5 Ω and 12 Ω. How much current would flow through the 12 Ω resistor?


The following circuit diagram shows three resistors 2 Ω, 4 Ω and R Ω connected to a battery of e.m.f 2V and internal resistance 3 Ω. If the main current of 0.25 A flows through the circuit, find:

  1. the p.d. across the 4 Ω resistors,
  2. the p.d. across the internal resistance of the cell,
  3. the p.d. across the R Ω or 2 Ω resistors, and
  4. the value of R.


Match the pairs.

‘A’ Group  ‘B’ Group 
1. Free electrons a. V/R 
2. Current b. Increases the resistance in the circuit 
3. Resistivity c. Weakly attached 
4. Resistances in series d. VA/LI

By what name is the unit joule/coulomb called?

What should be the current rating of a fuse to be used with an electric appliance of rating 1.5 kW-220 V? How is the fuse connected with the appliance?

Tick(✓) the correct choice in the following:

The outer casing of an electric iron is generally connected to earth in order
to


What is the criteria for selecting a fuse wire?


What is meant by the term 'electromotive force' of a cell?

Fig . shows the core of a transformer and i ts input and output connections 

State the material used for the core and describe th e structure of the core.
(a) Use the values given in the diagram to calculate the turns ratio for the transformer and connections, labeling all parts of the diagram .
(b) If a current of 2 A is taken from th e output, calculate th e current in the input circuit (Assume the transformer to be ideal ).


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×