Revision: Magnetic Effects of Electric Current Physics HSC Science (General) 12th Standard Board Exam Maharashtra State Board

Current passed through each of the two infinitely long parallel straight conductors kept at a distance of one meter apart in vacuum causes each conductor to experience a force of 2 × 10^-7 newton per meter length of the conductor.

The current sensitivity of a galvanometer is defined as the deflection produced in the galvanometer when a unit current flows through it.  
Mathematically, it can be given by:

I_S = `(NBA)/k`

Where k is the couple per unit twist.

Current sensitivity is defined as the deflection e per unit current.

A Moving Coil Galvanometer (MCG) is a sensitive electromagnetic instrument used to detect and measure small electric currents (of the order of microamperes to milliamperes) by measuring the deflection of a current-carrying coil placed in a uniform magnetic field.

Deflection produced per unit current.

Deflection produced per unit voltage.

The current required to produce a unit deflection (1 division) on the scale.

A device used to accelerate positively charged particles (α particles, deutrons, protons, etc.) to acquire enough energy to carry out nuclear disintegration is called a cyclotron.

CS = \[\frac{\phi}{I}=\frac{NAB}{C}\]

Unit: div/A or div/μA

k = \[\frac{I}{\phi}=\frac{C}{NAB}\]

k is the reciprocal of current sensitivity. A galvanometer with a smaller figure of merit is more sensitive.

VS = \[\frac{\phi}{V}=\frac{NAB}{CG}\]

where G = resistance of the galvanometer coil.

Unit: div/V

mv = p = q BR

f_a​ = f_c​

Final energy in cyclotron: proportional to \[\ R_{exit}^2\]

Statement

The line integral \[\oint\vec{B}\cdot d\vec{l}\] taken around any closed loop equals μ₀ times the net steady current passing through the loop.

Proof (for a long straight wire)

• Consider an infinitely long straight wire carrying current I.

• By Biot–Savart law, field at distance r:
  B = \[\frac{\mu_0I}{2\pi r}\]

• Choose a circular Amperian loop of radius r, concentric with the wire.

• By symmetry, B is constant in magnitude and tangential (parallel to \[d\vec l\]) everywhere:
  \[\oint\vec{B}\cdot d\vec{l}=B\oint dl\] = B(2πr)

• Substituting B:
  \[\oint\vec{B}\cdot d\vec{l}=\frac{\mu_0I}{2\pi r}(2\pi r)\] = μ₀​I

Conclusion

\[\oint\vec{B}\cdot d\vec{l}=\mu_0I\]
The result is independent of the loop's radius, confirming the law's validity.

Step 1: Torque due to current (Deflecting Couple):

• When current I flows through a coil of N turns, area A, in a field B: τ_deflecting = N I A B (Since radial field: sin⁡90° = 1)

Step 2: Restoring Torque (Spring):

• The phosphor-bronze strip/spring opposes the deflection. If ϕ is the angular deflection and C (or k) is the torsional constant of the spring, τ_restoring = Cϕ

Step 3: Equilibrium Condition:

• At equilibrium, deflecting torque = restoring torque: NIAB = Cϕ

Step 4: Current–Deflection Relationship:

• Electric field accelerates the particle; magnetic field keeps it in circular orbit of constant frequency.
• Resonance: polarity of Ds reverses as ion crosses gap after each semicircle.
• Cannot accelerate neutrons (uncharged) or electrons (small mass, high velocity).
• Ion speed is limited.