Advertisements
Advertisements
प्रश्न
What is the least count in the case of the following instrument?
Stopwatch
Advertisements
उत्तर
The least count of the following is
Stopwatch= 0.1 s
APPEARS IN
संबंधित प्रश्न
The pitch of a screw gauge is 1 mm and the circular scale has 100 divisions. In measurement of the diameter of a wire, the main scale reads 2 mm and 45th mark on the circular scale coincides with the base line. Find
(i) The least count and
(ii) The diameter of the wire.
State the formula for determining a pitch
When does a vernier callipers has the negative error?
The thimble of a screw gauge has 50 divisions for one rotation. The spindle advances 1 mm when the screw is turned through two rotations.
- What is the pitch of the screw?
- What is the least count of screw gauge?
- When the screw gauge is used to measure the diameter of wire the reading on the sleeve is found to be 0.5 mm and reading on thimble is found, 27 divisions. What is the diameter of the wire in centimetres?
Name the measuring employed to measure the thickness of a paper.
State whether the following statement is true or false by writing T/F against it.
The diameter of a wire can be measured more accurately by using vernier calipers than by a screw gauge.
What is the least count in the case of the following instrument?
Spring balance
Consider the following case where the zero of vernier scale and the zero of the main scale are clearly seen. If L.C. of the vernier calipers is 0.01 cm, write the zero error and zero correction of the following.
The following diagrams (Fig. 5) show the use of a vernier caliper under three different situations. Study the diagrams carefully and note down the vernier readings in each case.
(a) Measuring the diameter of the rod
(b) Measuring Internal diameter of a cavity
(c) Measuring depth of a cavity
