हिंदी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान 2nd PUC Class 12

Vapour pressure of pure water at 298 K is 23.8 mm Hg. 50 g of urea (NH2CONH2) is dissolved in 850 g of water. Calculate the vapour pressure of water for this solution and its relative lowering. - Chemistry

Advertisements
Advertisements

प्रश्न

Vapour pressure of pure water at 298 K is 23.8 mm Hg. 50 g of urea (NH2CONH2) is dissolved in 850 g of water. Calculate the vapour pressure of water for this solution and its relative lowering.

संख्यात्मक
Advertisements

उत्तर

Given, P0 = 23.8 mm Hg

w1 = 850 g, M1 (water) = 18 g mol−1

w2 = 50 g, M2 (urea) = 60 g mol−1

Ps = ?, `("P"^0 - "P"_"s")/"P"^0` = ?

∴ n1 = `850/18` = 47.22

∴ n2 = `50/60` = 0.83

Applying Raoult's law, `("P"^0 - "P"_"s")/"P"^0 = "n"_2/("n"_1+"n"_2)`

or, `("P"^0 - "P"_"s")/"P"^0 = 0.83/(47.22 + 0.83)`

`("P"^0 - "P"_"s")/"P"^0 = 0.83/48.05`

`("P"^0 - "P"_"s")/"P"^0` = 0.017

Thus, the relative lowering of vapour pressure = 0.017

Again, `(Δ"P")/"P"^0` = 0.017

∴ ΔP = 0.017 × 23.8

or, P0 − Ps = 0.017 × 23.8

or, Ps = 23.8 − (0.017 × 23.8)

or, Ps = 23.4 mm Hg

Thus, the vapour pressure of water in the solution is 23.4 mm Hg.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 1: Solutions - Intext Questions [पृष्ठ २३]

APPEARS IN

एनसीईआरटी Chemistry Part 1 and 2 [English] Class 12
अध्याय 1 Solutions
Intext Questions | Q 1.9 | पृष्ठ २३

संबंधित प्रश्न

In non-ideal solution, what type of deviation shows the formation of maximum boiling azeotropes?


State Raoult’s law for the solution containing volatile components


What is meant by positive deviations from Raoult's law? Give an example. What is the sign of ∆mixH for positive deviation?


What type of deviation is shown by a mixture of ethanol and acetone? Give reason.


An aqueous solution of 2% non-volatile solute exerts a pressure of 1.004 bar at the normal boiling point of the solvent. What is the molar mass of the solute?


Calculate the mass of a non-volatile solute (molar mass 40 g mol−1) which should be dissolved in 114 g octane to reduce its vapour pressure to 80%.


100 g of liquid A (molar mass 140 g mol−1) was dissolved in 1000 g of liquid B (molar mass 180 g mol−1). The vapour pressure of pure liquid B was found to be 500 torr. Calculate the vapour pressure of pure liquid A and its vapour pressure in the solution if the total vapour pressure of the solution is 475 Torr.


Some liquids on mixing form 'azeotropes'. What are 'azeotropes'?


For the reaction :

\[\ce{2NO_{(g)} ⇌ N2_{(g)} + O2_{(g)}}\];

ΔH = -heat

K= 2.5 × 10at 298K

What will happen to the concentration of Nif :

(1) Temperature is decreased to 273 K.

(2) The pressure is reduced


Define Raoult’s law for the elevation of the boiling point of a solution.


What will be the vapour pressure of a solution containing 5 moles of sucrose (C12H22O11) in 1 kg of water, if the vapour pressure of pure water is 4.57 mm of Hg? [C = 12, H = 1, O = 16]


At equilibrium the rate of dissolution of a solid solute in a volatile liquid solvent is ______.


On the basis of information given below mark the correct option.

(A) In bromoethane and chloroethane mixture intermolecular interactions of A–A and B–B type are nearly same as A–B type interactions.

(B) In ethanol and acetone mixture A–A or B–B type intermolecular interactions are stronger than A–B type interactions.

(C) In chloroform and acetone mixture A–A or B–B type intermolecular interactions are weaker than A–B type interactions.


On the basis of information given below mark the correct option.
On adding acetone to methanol some of the hydrogen bonds between methanol molecules break.


Two liquids X and Y form an ideal solution. The mixture has a vapour pressure of 400 mm at 300 K when mixed in the molar ratio of 1 : 1 and a vapour pressure of 350 mm when mixed in the molar ratio of 1 : 2 at the same temperature. The vapour pressures of the two pure liquids X and Y respectively are ______.


The vapour pressure of pure liquid X and pure liquid Y at 25°C are 120 mm Hg and 160 mm Hg respectively. If equal moles of X and Y are mixed to form an ideal solution, calculate the vapour pressure of the solution.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×