हिंदी
तमिलनाडु बोर्ड ऑफ सेकेंडरी एज्युकेशनएसएसएलसी (अंग्रेजी माध्यम) कक्षा १०

The power of an electric device is a product of ______ and ______.

Advertisements
Advertisements

प्रश्न

The power of an electric device is a product of ______ and ______.

रिक्त स्थान भरें
Advertisements

उत्तर

The power of an electric device is a product of electric current and the potential difference.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 4: Electricity - Evaluation [पृष्ठ ५६]

APPEARS IN

सामाचीर कलवी Science [English] Class 10 SSLC TN Board
अध्याय 4 Electricity
Evaluation | Q II. 4. | पृष्ठ ५६

संबंधित प्रश्न

What actually travels through the wires when you switch on a light?


State the factors on which the strength of electric current flowing in a given conductor depends.


The circuit diagram given below shows the combination of three resistors R1, R2 and R3

  

Find :
(i) total resistance of the circuit.
(ii) total current flowing in the circuit.
(iii) the potential difference across R1.

 

 


What happens to the resistance if the conductor is made thinner?

Complete the following sentence:

Fuse wire has a ............ Melting point and it is made of an alloy of ......... and if the current in a circuit rises too high, the fuse wire ...........


Tick(✓) the correct choice in the following:

24 watt, 12 volt head lamp is fully lit by connecting it to a 12 volt
battery. The working resistance of the lamp is


Tick(✓) the correct choice in the following:

Which of the following quantities has the same value for all electrical
appliances connected to the ring main circuit in a house?


A current of 0.3 A is flowing through a branch of 6 Ω resistors in a junction as shown in fig. . Calculate the
(a) P.d. across the junction XY,
(b) Current flowing through 9Ω and 24Ω
( c) P.d. across 24 Ω resistor, and
( d) e.m.f. of the cell.


Three heaters each rated 250 W, 100 V are connected in parallel to a 100 V supply of the energy supplied in kWh to the three heaters in 5 hours.


Study the following circuit and find out:
      (i) Current in 12 Ω resistor.
      (ii) The difference in the readings of A1 and A2, if any.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×