Advertisements
Advertisements
प्रश्न
The following belong to which class of lever?
A pair of scissors
To which class of lever does a pair of scissors belong?
Advertisements
उत्तर
The pair of scissors belongs to a Class I lever.
APPEARS IN
संबंधित प्रश्न
A 4 m long rod of negligible weight is to be balanced about a point 125 cm from one end and a load of 18 kgf is suspended at a point 60 cm from the support on the shorter arm.
- If a weight W is placed at a distance of 250 cm from the support on the longer arm to balance the rod, find W.
- If a weight 5 kgf is kept to balance the rod, find its position.
- To which class of lever does it belong?
A lever of length 9 cm has its load arm 5 cm long and the effort arm is 9 cm long.
- To which class does it belong?
- Draw a diagram of the lever showing the position of fulcrum F and directions of both the load L and effort E.
- What is the mechanical advantage and velocity ratio if the efficiency is 100%?
- What will be the mechanical advantage and velocity ratio if the efficiency becomes 50%?
Give three examples for leavers of the third order.
The following belong to which class of lever?
The Physical balance
The following belong to which class of lever?
Nutcracker
The following belong to which class of lever?
Fore-arm
When we want to use a machine as a force multiplier, which class of lever should we preferably use? Give a simple diagram of such a lever.
The diagram below shows a lever in use.
(i) To which class of lever does it belong?
(ii) If FA = 40 cm, AB = 60 cm, then find the mechanical advantage of the lever.
The diagram shows the use of a lever.
- State the principle of moments as applied to the above lever.
- Which class of lever is this? Give an example of this class of lever.
- If FA = 100 cm, AB = 90 cm, calculate the minimum effort required to lift the load.
The length of a nut-cracker is 12 cm. A nut, when kept at a distance of 4 cm from its fulcrum, requires an effort of 100 gf to crack it. What force will be required to crack the nut without using the nut-cracker?
